Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Fits RH (Passenger Side)
  • Replaces dealer part numbers: 5303738AE, 5303738AH, 5303738AI
  • Includes lens & housing
  • Built to strict quality control standards
  • Does not include bulbs or wiring
  • Does NOT fit models with Headlight Leveling System (SRT-4 Package)
This headlight is a great replacement and has good cost savings over a head light from the dealer.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Accessing the Headlight (0:41)
    • Remove the T25 Torx bolts from the top of the bumper
    • Remove the two 7mm bolts in the wheel well
    • Pull the plastic clip out of the inner fender
    • Pull back the inner fender
    • Remove the 7mm bolt from inside the inner fender
    • Remove the two plastic clips from the bottom of the bumper
    • Remove the three 10mm bolts underneath the bumper
    • Pull the bumper aside
  2. step : Removing the Headlight (2:59)
    • Remove the three 10mm bolts from the headlight
    • Pull the headlight forward and out
  3. step : Servicing the Headlight Bulb (3:39)
    • Twist out the headlight bulb socket
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb into the headlight
    • Twist out the signal light bulb socket
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb into the headlight
    • Disconnect the wiring harnesses
  4. step : Installing the New Headlight (4:44)
    • Connect the wiring harnesses to the new headlight
    • Push the new headlight into place
    • Insert the three 10mm bolts into the headlight
  5. step : Reattaching the Bumper (5:34)
    • Line up the bumper cutout with the washer
    • Push the bumper into place
    • Insert the two plastic clips at the bottom of the bumper
    • Insert the three 10mm bolts into the bottom of the bumper
    • Insert the plastic clip into the inner fender
    • Insert the 7mm bolt behind the inner fender
    • Insert the two 7mm bolts into the wheel well
    • Insert the T25 Torx bolts into the top of the bumper

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Wire Cutters

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 7mm Socket

  • Torx Drivers & Sockets

  • T25 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2007-2012Dodge Caliber Dodge Caliber (excluding SRT-4) Headlight Passenger Side
Part #: 1ALHL01337


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:19 min)