This replacement window regulator is just what you need to get your vehicle in good shape again!

Specifications:

  • LH (Driver Side) REAR
  • Power operation
  • Replaces dealer part numbers: 69804-06110, 6980406110
  • Direct replacement
  • Built to strict quality control standards
  • Power window motor NOT included
  • Fits US Built models only
    • US built vehicles have a 1,2, or 4 for the first digit of the VIN (Vehicle Identification Number)

This window regulator makes a great replacement and has good cost savings over a dealer unit.

Please Note: This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original.  It has been subjected to extensive testing and quality control standards.  That is why we offer this regulator with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push-in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this window regulator does not fit the application stated.
    •  This regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.
Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:26)
    • Pry the trim panel out of the door handle with a trim tool
    • Remove the Phillips screw inside the door handle
    • Pry the trim panel off the door pull with a trim tool
    • Remove the two Phillips screws inside the door pull
    • Pop out the door panel clips
    • Lift the door panel up and off the door
    • Pull the door handle out of the back of the door panel
    • Disconnect the window switch electrical harness
    • Remove any push clips stuck in the door with a trim tool
    • Slide the push clips into the door panel
  2. step : Removing the Interior Door Handle (2:38)
    • Push the cables up and out
  3. step : Removing the Window Switch (4:15)
    • Peel off the weatherstripping
    • Slide the cables out of the weatherstripping
    • Press on the weatherstripping
    • Pry out the window switch with a door trim removal tool
    • Plug in the window switch
    • Lower the window
    • Turn the ignition off
  4. step : Removing the Window Regulator (4:52)
    • Disconnect the window motor lead
    • Pull out the window run channel
    • Remove the two 10mm bolts from the window track
    • Remove the Phillips screw from the channel
    • Remove the run channel/window track
    • Remove the rubber from the channel
    • Raise the window by hand
    • Remove the four 10mm bolts from the regulator
    • Pull the window regulator out through the door
  5. step : Reinstalling the Regulator (7:30)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert the four 10mm bolts into the regulator
    • Lower the window onto the regulator
    • Insert the window channel
    • Tighten the 10mm bolts to the channel
    • Tighten the Phillips screw to the channel
    • Press on the window channel weatherstripping
  6. step : Reinstalling the Interior Door Handle (15:06)
    • Connect the white latch to the lock
    • Connect the green latch to the door
  7. step : Installing the Door Panel (16:10)
    • Pop the door handle into the door panel
    • Connect the window switch electrical harness
    • Line up the door panel with the door
    • Push in the door panel clips
    • Insert the Phillips screw into the door handle
    • Clip on the door handle trim
    • Insert the two Phillips screws into the door pull
    • Clip on the door pull trim piece

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper

  • Materials, Fluids, and Supplies

  • Gloves

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T25 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007-2011 Toyota Camry (US Built Models) Rear Power Window Regulator Driver Side

This part replaces:

  • OE # 6980406110
  • Hollander 135-58764L
Only 5 left in stock
Part #: 1AWRG02156

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(17:32 min)