2007-11 Honda CR-V Strut & Spring Assembly Pair - 1ASSP01106

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Pre-assembled, loaded strut & spring assemblies allow for a quicker, safer install than replacing with just bare struts. 

Trouble-Free Install

Trouble-free install includes the matched parts needed to get the job done. New mounts, bearings, springs and hardware will provide a better ride for your vehicle and save you time from not having to do the job again because a used part failed afterwards.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
Good match
I would recommend this product. I would purchase it again for my own use. It was received promptly after being ordered. It was an exact match to the old part.
December 8, 2017
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
How are these installed?
spanky115 on Mar 16, 2018
BEST ANSWER: If you have a 12, 14, and 17mm sockets it is simple. Basically 4 to 5 components to unbolt, struts come out and then reverse. Plenty of YouTube videos to walk you through it.

Vehicle Fit

  • 2007-2011 Honda CR-V Rear Strut & Spring Assembly Pair

This part replaces:

  • Hollander 527-50269R
  • Hollander 527-50270L
  • Monroe 172497L
  • Monroe 172497R
  • KYB SR4244
  • KYB SR4243
Part #: 1ASSP01106