This replacement Toyota Camry tail light is just what you need to get your Toyota in good looking form again!

Specifications:

  • RH (Passenger Side)
  • Replaces dealer Part Numbers: 81551-06240, 81551-33340
  • Mounts on 1/4 panel
  • Assembly includes lens and housing
  • Department of Transportation (DOT) & Society of Automotive Engineers (SAE) approved
  • Direct replacement
  • Built to strict quality control standards
  • Bulbs and wiring not included

Note: This light will fit Hybrid models but appearance is different.

This Toyota Camry tail light makes a great replacement and has good cost savings over a dealer unit.

 

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Rear Bumper (0:26)
    • Remove the Phillips screw from the access hole in the wheel well liner
    • Remove the screw beneath the fender liner
    • Remove the screws from underneath the bumper
    • Open the trim buttons on the bumper
    • Remove the 10mm bolts from the bumper
    • Mark the bumpers position with tape
    • Pull out the bumper from the side
    • Separate the bumper from the rear
  2. step : Removing the Tail Light (3:46)
    • Pull back the carpet trim in the trunk
    • Remove the 10mm bolts from the tail light
    • Turn the bulb sockets counterclockwise to remove them from the light
    • Slide the tail light out
  3. step : Installing the Tail Light (6:18)
    • Press the tail light into the car
    • Turn the bulb sockets clockwise to stick them in the light
    • Tighten the 10mm bolts to the light
    • Press on the carpet trim
  4. step : Installing the Rear Bumper (8:38)
    • Lift the bumper onto the rear
    • Line up the slots with the holes on the bumper
    • Push the bumper into place
    • Tighten the 10mm bolts to the bumper
    • Press on the trim button to the bumper
    • Tighten the screw beneath the fender liner
    • Tighten the Phillips screw though the access hole in the wheel well liner

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Received item quickly and it is exactly what I wanted. very good price and no shipping price.
September 13, 2017
Purchased
7 months ago
Camry Tail Light
Part arrived quickly and was exactly what I ordered, the fit was perfect,
Thanks!
January 30, 2018
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007-2009 Toyota Camry (excluding Hybrid Models) (Japan Built Models (1st VIN Digit J)) Tail Light Passenger Side

This part replaces:

  • Partslink TO2819131
  • Hollander 166-50378AR
  • OE # 8155133340
  • TYC s11-6183-00
  • DEPO 312-1978R-US
Part #: 1ALTL00508



How-to Video:

(10:37 min)