2007-09 Toyota Camry Tail Light Pair - 1ALTP00560

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair

This replacement Tail light is just what you need to get your vehicle in good looking form again!

This tail lamp features the following specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver) and RH (Passenger) Sides
  • Replaces dealer part numbers: 81561-33490, 8156133490, 81551-33490, 8155133490
  • Includes lens & Housing
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Correct for Hybrid Models only

This tail light makes a great replacement and has good cost savings over a dealer unit.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Rear Bumper (0:26)
    • Remove the Phillips screw from the access hole in the wheel well liner
    • Remove the screw beneath the fender liner
    • Remove the screws from underneath the bumper
    • Open the trim buttons on the bumper
    • Remove the 10mm bolts from the bumper
    • Mark the bumpers position with tape
    • Pull out the bumper from the side
    • Separate the bumper from the rear
  2. step : Removing the Tail Light (3:46)
    • Pull back the carpet trim in the trunk
    • Remove the 10mm bolts from the tail light
    • Turn the bulb sockets counterclockwise to remove them from the light
    • Slide the tail light out
  3. step : Installing the Tail Light (6:18)
    • Press the tail light into the car
    • Turn the bulb sockets clockwise to stick them in the light
    • Tighten the 10mm bolts to the light
    • Press on the carpet trim
  4. step : Installing the Rear Bumper (8:38)
    • Lift the bumper onto the rear
    • Line up the slots with the holes on the bumper
    • Push the bumper into place
    • Tighten the 10mm bolts to the bumper
    • Press on the trim button to the bumper
    • Tighten the screw beneath the fender liner
    • Tighten the Phillips screw though the access hole in the wheel well liner

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2007-2009Toyota Camry Toyota Camry Hybrid Tail Light Pair
Only 2 left in stock
Part #: 1ALTP00560

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:37 min)