Specifications:

  • Brand New Grille
  • Black (Paint to Match) with Chrome
    • can be painted by buyer to match
  • Correct for XLE models only
  • High quality injection molded plastic
  • Replaces dealer part number: 5310106080, 53101-06080-C0
  • Direct replacement
  • Built to strict quality control standards
  • Does not include emblem

 

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Front Bumper (0:24)
    • Place tape along the edge of the bumper to mark its location
    • Remove the 10mm bolts from the splash shield
    • Remove the splash shields
    • Turn the clip in the fender liner on either side
    • Pull back the fender liner
    • Remove the 10mm bolt from the bumper on either side
    • Remove the 10mm bolt from the metal support on top of the bumper
    • Pry up the plastic pin from the headlight with a flat blade screwdriver
    • Remove the Phillips retainer from the bracket
    • Pry up the plastic pin from the headlight with a flat blade screwdriver
    • Pull the bumper off of the bracket
  2. step : Removing the Upper Grille (6:15)
    • Remove the Phillips head screws on either side
    • Press in the push tabs along the edge of the grille
    • Remove the grille
  3. step : Installing the Upper Grille (8:12)
    • Gently snap the grille into the bumper cover
    • Tighten the Phillips head screws to the grille
  4. step : Installing the Front Bumper (8:57)
    • Hang the bumper on the top brackets
    • Push the bumper into the bracket on both sides
    • Press in the push clips to the headlights
    • Tighten the Phillips retainers to the metal bracket
    • Press in the clips to the bumper
    • Tighten the screw to the bumper behind the fender liner on both sides
    • Replace the splash shield
    • Tighten the 10mm bolts to the splash shield

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant
  • Painter's Tape

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(11:43 min)

Tools List:

    Materials, Fluids, and Supplies

  • Rust Penetrant
  • Painter's Tape

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set



This part replaces:

  • OE # 5310106080C0
  • Partslink TO1200289
  • Hollander 104-50306B

Vehicle Fit

  • 2007-2009 Toyota Camry XLE Chrome & Black Upper Grille Smooth - Paint to Match
Part #: 1ABGR00597

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More