Specifications:

  • Brand New Sway Bar Links
  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Part Details

  • Quantity: 4 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:25)
    • Pry off the wheel cover with a flat blade screwdriver
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Front Sway Bar Links (1:13)
    • Loosen the upper sway bar link bolt with a 6mm allen key bit and breaker bar and a 14mm wrench, or vise grip pliers and a 17mm wrench
    • Remove the upper portion of the sway bar link
    • Insert the upper portion and gently tighten the nut
    • Loosen the lower sway bar link bolt with a 6mm allen key bit and breaker bar and a 14mm wrench, or vise grip pliers and a 17mm wrench
  3. step : Installing the Front Sway Bar Links (3:00)
    • Insert the upper portion of the sway bar link in place
    • Insert the lower portion of the sway bar link in place
    • Counter hold the upper portion with an 18mm wrench
    • Tighten the upper nut with an 18mm socket and ratchet
    • Repeat for the lower portion
    • Tighten the nuts 55 foot-pounds of torque
  4. step : Reattaching the Wheel (4:45)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Allen Wrenches

  • 6mm Allen Wrench

  • General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket

  • Wrenches - Metric

  • 21mm wrench
  • 17mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2017 Toyota Rav4 Front & Rear Sway Bar Link 4 Piece Set

This part replaces:

  • Moog K750043
  • OE # 488300R010, 4883042020
  • OE # 488200R010
  • Beck Arnley 101-5737
  • Moog K750257
Part #: 1ASFK04712

How-to Video:

(06:00 min)