Replaces

2006-15 Toyota Rav4 Steering & Suspension Kit - 1ASFK05726


Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Rear Sway Bar Links
  • Kit Includes: (2) Front Outer Tie Rods
  • Quantity: 8 Piece Set
  • Kit Includes: (2) Front Inner Tie Rods

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Removing the Wheel (0:25)
    • Pry off the wheel cover with a flat blade screwdriver
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Front Sway Bar Links (1:13)
    • Loosen the upper sway bar link bolt with a 6mm allen key bit and breaker bar and a 14mm wrench, or vise grip pliers and a 17mm wrench
    • Remove the upper portion of the sway bar link
    • Insert the upper portion and gently tighten the nut
    • Loosen the lower sway bar link bolt with a 6mm allen key bit and breaker bar and a 14mm wrench, or vise grip pliers and a 17mm wrench
  3. step : Installing the Front Sway Bar Links (3:00)
    • Insert the upper portion of the sway bar link in place
    • Insert the lower portion of the sway bar link in place
    • Counter hold the upper portion with an 18mm wrench
    • Tighten the upper nut with an 18mm socket and ratchet
    • Repeat for the lower portion
    • Tighten the nuts 55 foot-pounds of torque
  4. step : Reattaching the Wheel (4:45)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Allen Wrenches

  • 6mm Allen Wrench

  • General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket

  • Wrenches - Metric

  • 21mm wrench
  • 17mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2015 Toyota Rav4 8 Piece Set Steering & Suspension Kit

This part replaces:

  • OE # 4504609650
  • OE # 4504709310
  • OE # 4551042030
  • OE # 488200R010
  • OE # 488300R010
  • OE # 4883042020
  • Moog ES800053
  • Moog ES800054
  • Moog EV800328
  • Moog K750043
  • Moog K750257
  • Beck Arnley 101-5737
Part #: 1ASFK05726

How-to Video:

(06:00 min)