Replaces

2006-11 Hyundai Accent Kia Rio Brake Kit Nakamoto CD1156, 517121G000 - 1ABFS01481

This brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • 4 Piece FRONT Brake Pad Set
  • Includes shims
  • Direct replacements
  • Professional Grade Ceramic Enhanced Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part number: 51712-1G000, 517121G000
  • Fit 4 Lug Wheels
  • Direct replacements

This brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:17)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:26)
    • Remove 17mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  3. step : Removing the Brake Rotor (3:13)
    • Remove 17mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the Phillips screws from the rotor
    • Pull the rotor off
  4. step : Preparing the New Brake Pads and Rotors (5:57)
    • Clean the slides with a wire brush
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on with a flat blade screwdriver
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Clean the rotor with brake parts cleaner
  5. step : Installing the New Brake Rotor (8:05)
    • Slide the rotor on
    • Clean it with mineral spirits or brake parts cleaner
    • Put the bracket back into place
    • Start the 17mm bolts by hand
    • Tighten the bolts to 58-71 foot-pounds of torque
  6. step : Installing the New Brake Pads (11:37)
    • Apply grease to the brake pad tabs
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 16 to 24 foot-pounds
  7. step : Reattaching the Wheel (13:13)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 65-79 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (14:56)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Rubber Mallet
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner
  • Paper Towels
  • Bungee Cord
  • Anti-Seize Grease
  • Mineral Spirits

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 21mm Socket
  • 10mm Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Great company
Parts appeared to be of high quality and were an exact fit. Pricing was half of what automotive parts store was asking. I have bought a number of parts from 1A Auto and have always had a great price and good service.
April 24, 2017
Purchased
1 year ago
08 Hyundai accent front pads and rotors
They were delivered on time and work great. Very quiet too despite being installed less than a week ago
July 21, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2011 Hyundai Accent Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2006-2011 Kia Rio Front Premium Posi Ceramic Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD1156, 517121G000
Part #: 1ABFS01481



Nakamoto
Brand #: CD1156, 517121G000

How-to Video:

(15:39 min)