Replaces

2006-11 Honda Civic Steering & Suspension Kit - 1ASFK03759

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   10 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Front Lower Control Arms
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 10 Piece Kit
    • Fits LH (Drivers Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (0:20)
    • Loosen the lug nuts with a 19mm socket
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Ball Joint (0:20)
    • Pull the knuckle toward you
    • Straighten the cotter pin
    • Remove the cotter pin from the castle nut
    • Loosen the nut with a 19mm wrench and dead blow mallet if needed
    • Remove the ball joint with a ball joint separator, ratchet, and socket
    • Remove the castle nut
    • Remove the ball joint from the lower control arm with a pry bar
  3. step : Installing the Ball Joint (5:18)
    • Clean the surface of the lower control arm
    • Insert the ball joint into the knuckle
    • Hand-tighten the castle nut
    • Maneuver the ball joint into the control arm
    • Tighten the bolts to the ball joint with a 17mm socket and ratchet
    • Torque the three lower nuts to 43 foot-pounds
    • Tighten the castle nut with a 22mm wrench
    • Insert the cotter pin
    • Bend the ends of the cotter pin
  4. step : Reattaching the Wheel (9:15)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 22mm socket

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Paper Towels

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • Complete Metric Socket Set

  • Wrenches - Metric

  • Complete Metric Wrench Set

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2006-2011Honda Civic Honda Civic 10 Piece Set Steering & Suspension Kit (excluding SI Models)
Part #: 1ASFK03759


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:52 min)