Specifications:

  • Direct replacement
  • Plastic tanks with aluminum core
  • Dimensions:
    • Height: 14-3/4"
    • Width:  26-3/8"
    • Depth:  11/16"
  • Built to strict quality control standards

 

Packaging:

Radiators may incur bent cooling fins or small imperfections during shipping or manufacturing. A few bent fins or small dents and scratches do not affect the fit or the function of the part. Neither our 60 Day satisfaction guarantee, nor the manufacturer's warranty, cover these types of insignificant damages.

Direct Fit Replacement

Core thickness equal to the OE part.  If radiator core is slightly thinner than the OEM, this can decrease overall performance and lifespan.

Premium Aluminum Core

Engineered for top performance.  Provides efficient cooling and heat-transfer.

100% Leak Tested

Built to strict quality control standards.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Radiator Shield (0:20)
    • Pop and secure the hood
    • Pry off the push clips from the shield
    • Remove the shield
  2. step : Draining the Coolant (2:13)
    • Raise and support the vehicle
    • Have a drain pan ready
    • Loosen the radiator drain plug with a pair of pliers
    • Reinstall the drain plug
  3. step : Disconnecting the Cooling Fan (3:48)
    • Unplug the A/C and radiator cooling fan's wiring harness
    • Press the tabs and release the wire from the fan bracket
    • Pop the clip out of the radiator bracket
  4. step : Removing the Battery (5:31)
    • Remove the 10mm negative battery terminal
    • Remove the 10mm positive battery terminal
    • Loosen the 10mm battery hold down bolts
    • Lift the battery hold down out without touching the terminals
    • Remove the plastic cover from the battery
    • Lift the battery up and out
  5. step : Removing the Radiator Support (7:50)
    • Disconnect the electrical connector from the fan
    • Unclip the connector from the fan
    • Pop the radiator hose out of the bracket
    • Pry off the radiator hose from the filler neck
    • Unbolt the two 10mm bolts from the filler neck
    • Remove the two T30 Torx bolts from the grille
    • Remove the 10mm bolt from the A/C condenser bracket
    • Remove the two 10mm bolts from the A/C top bracket
    • Remove the three 10mm bolts on each side of the radiator support ends
    • Remove the temp sensor wiring harness clips from the radiator support
    • Lift the radiator support out of the way
  6. step : Removing the Radiator (13:13)
    • Disconnect the electrical connector at the bottom of the radiator
    • Loosen the hose clamp on the radiator hose connected to the engine block
    • If the hose is stuck, break the seal with a pick
    • Loosen the hose clamp on the lower radiator hose
    • Disconnect the lower radiator hose
    • Lift the radiator and fans up and out of the car
    • Pour out any excess coolant from the radiator
  7. step : Removing the Cooling Fans (16:00)
    • Remove the 10mm bolts from the cooling fans
    • Lift the fan up and out of the radiator
    • Loosen the hose clamps on the hose
    • Remove the hose from the radiator
    • Pry out the quick disconnect with a flat blade screwdriver
    • Remove the radiator hose
    • Remove the quick disconnect carefully with a pry bar
    • Loosen the filler neck hose clamp
    • Remove the filler neck hose
    • Remove the temperature sensor with a 17mm wrench
  8. step : Installing the Cooling Fans (20:38)
    • Place the spring clip on the quick disconnect
    • Connect the quick disconnect
    • Clamp on the spring
    • Tighten the temperature sensor with a 17mm wrench
    • Connect the hose to the quick disconnect
    • Tighten the hose clamp
    • Connect the radiator hose
    • Tighten the hose clamp
    • Connect the filler neck
    • Tighten the hose clamp to the filler neck
    • Insert the fans into place
    • Tighten the 10mm bolts to the cooling fans
  9. step : Reinstalling the Radiator (23:25)
    • Insert the radiator down into place
    • Connect the lower radiator hose
    • Tighten the hose clamp
    • Connect the upper radiator hose
    • Tighten the hose clamp
    • Connect the temp sensor wiring harness
  10. step : Reinstalling the Radiator Support (26:06)
    • Insert the radiator support into place
    • Clip in the wiring harness bracket
    • Clip in the fan wiring harness
    • Connect the coolant overflow hose to the filler neck
    • Clip in the hose to the overflow bottle
    • Tighten the bolts to the overflow neck
    • Connect the wiring harness clips to the fan
    • Tighten the 10mm bolts to the upper radiator mounts
    • Tighten the 10mm bolts to the bushings
    • Tighten the T30 Torx bolts to the grille mount
    • Tighten the three 10mm bolts to either end of the radiator support
  11. step : Reinstalling the Radiator Shield (31:13)
    • Insert the radiator shield into place
    • Press the clips in to the radiator shield
  12. step : Reinstalling the Battery (32:19)
    • Place the battery cover on
    • Insert the battery into place
    • Hook in the battery hold down
    • Tighten the 10mm battery hold down bolts
    • Connect the positive terminal and tighten the 10mm bolt
    • Connect the negative terminal and tighten the 10mm bolt
  13. step : Refilling the Coolant (33:51)
    • Insert a funnel into the radiator
    • Fill the radiator with a 50/50 mix of the appropriate coolant
    • Squeeze the upper and lower radiator hoses to remove any air bubbles
    • Start the system and let air bubbles rise until the thermostat opens
    • Turn off the vehicle
    • Remove the funnel and excess coolant

Tools needed for replacement:

    General Tools

  • Funnel
  • Jack Stands
  • Drain Pan
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Anti-Freeze
  • Paper Towels

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 10mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

  • Wrenches - Metric

  • 17mm Wrench
  • 10mm Wrench

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Parts are everything
I have ordered several things 1A and each time I was not disappointed withe the quality of my order,this will be my go to company when I star at buying parts for my mustang, thank you 1A. Love the free shipping,great bargain for the price of the parts.
June 4, 2017
Purchased
1 year ago
My Honda
My first experience with 1aauto was a great one. I got what I wanted and needed for the right price and it was shipped on time with out any damage. And the service was great I would order here again and recommend everyone else to order what they need here.
March 20, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2006-2011Honda Civic Honda Civic Radiator L4 1.8L

This part replaces:

  • Hollander 675-50118E
  • OE # 19010RNBA51
  • Spectra Premium Industries CU2922
  • Partslink HO3010208
  • TYC 2922
Part #: 1ARAD00886


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(37:06 min)