The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time and cause a misfire condition. In engines like this that use a coil, if the coil goes bad, the complete assembly needs to be replaced.

Specifications:

  • Brand new coil over plug ignition coil
  • Includes spark plug boot
  • Replaces dealer part numbers: 30520RNAA01, 30520 RNAA01
  • Built to strict quality control standards
  • Direct replacement
  • 100% factory tested

This is an electrical part and is tested before it leaves our manufacturer.

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Direct Fit Replacement

Guaranteed to fit and function properly for your specific application.

Optimum Performance

Meets or exceeds requirements of the vehicle. Provides the correct primary and secondary resistance, voltage output, and spark energy needed to restore original operating condition.

Premium Quality

Manufactured with quality materials to meet highest quality control standards in the industry.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Ignition Coil (0:21)
    • Disconnect the ignition coil electrical connector
    • Remove the 10mm nut from the ignition coil stud
    • Pull the ignition coil out of the engine
  2. step : Installing the Ignition Coil (1:40)
    • Push the ignition coil into the engine
    • Start the 10mm nut onto the ignition coil stud by hand
    • Connect the ignition coil electrical connector
    • Tighten the 10mm nut to 8.7 foot-pounds

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2006-2011Honda Civic Honda Civic Ignition Coil L4 1.8L

This part replaces:

  • Hollander 610-50104
  • OE # 30520RNAA01
  • Standard Motor Products UF-582
Part #: 1AECI00226


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(02:26 min)