1ASFK03315-2006-11 Honda Civic Front Driver & Passenger Side Lower 2 Piece Ball Joint Set


2006-11 Honda Civic Front Driver & Passenger Side Lower 2 Piece Ball Joint Set TRQ


Part Details

  • Set Quantity: 2 Piece

This part replaces:

  • Beck Arnley 101-5950
  • Beck Arnley 101-5949
  • Moog K500070
  • Moog K500069
  • OE # 52130SNAA02
  • OE # 51220SNAA03
  • OE # 51220SNAA02
  • OE # 52130SNAA03
  • TRQ PSA63299
Part 1ASFK03315
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: PSA63299

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Set Quantity:   2 Piece


  • Brand New Ball Joints
  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greasable versions.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:20)
    • Loosen the lug nuts with a 19mm socket
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Ball Joint (0:20)
    • Pull the knuckle toward you
    • Straighten the cotter pin
    • Remove the cotter pin from the castle nut
    • Loosen the nut with a 19mm wrench and dead blow mallet if needed
    • Remove the ball joint with a ball joint separator, ratchet, and socket
    • Remove the castle nut
    • Remove the ball joint from the lower control arm with a pry bar
  3. step : Installing the Ball Joint (5:18)
    • Clean the surface of the lower control arm
    • Insert the ball joint into the knuckle
    • Hand-tighten the castle nut
    • Maneuver the ball joint into the control arm
    • Tighten the bolts to the ball joint with a 17mm socket and ratchet
    • Torque the three lower nuts to 43 foot-pounds
    • Tighten the castle nut with a 22mm wrench
    • Insert the cotter pin
    • Bend the ends of the cotter pin
  4. step : Reattaching the Wheel (9:15)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 22mm socket

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Paper Towels

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • Complete Metric Socket Set

  • Wrenches - Metric

  • Complete Metric Wrench Set

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2006-2011Honda Civic Honda Civic Front Driver & Passenger Side Lower 2 Piece Ball Joint Set

Part Interchange

Brand Label Part Number
Beck / Arnley 101-5949
Beck / Arnley 101-5950
Beck/Arnley 101-5949
Beck/Arnley 101-5950
DIY Solutions SUS02670
DIY Solutions SUS00337
DIY Solutions SUS00338
MOOG K500069
MOOG K500070
MOOG Chassis Products K500070
MOOG Chassis Products K500069
Mevotech MS60500

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: PSA63299
Product Reviews
3.33/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Speedy Replacement
Perfect fit replacement ball joints on my 2007 Honda Civic EX Sedan. Changed them out with no issues in an hour. Only need some wrenches and ball joint separator tool. Order and delivery was quick and painless.
July 27, 2018
wrong bolts, nut sizes, and no letter for side replacement.
Wrong bolts, nut sizes, and no letter for side replacement on joint. Disappointed in the poor quality of these none OEM. Lifetime warranty doesnt cover the none OEM cheap knock off. Hopefully they will last longer then a year. Wont shop at 1a Auto again.
August 6, 2019
Correct Fit!
This pair of lower ball joints correctly fit my 2006 Honda Civic LX Sedan. The only negative thing about these is the fact that they are not maked, left or right, but I found out that these would fit on either side.
November 19, 2019
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

2006-11 Honda Civic Front Driver & Passenger Side Lower 2 Piece Ball Joint Set TRQ-1ASFK03315 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.