2006-11 Honda Civic Engine & Transmission Mount Kit - 1AEEK00221

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set

This replacement engine & transmission mount set is just what you need to keep your motor & transmission firm in place!


  • Engine & Transmission Mount Set Includes:
    • (1) - Transmission Mount
    • (1) - FRONT Mount - RH (Passenger Side)
    • (1) - UPPER Engine Torque Strut Mount
    • (1) - LOWER Engine Torque Strut Mount
  • Direct replacements
  • No modifications needed
  • Built to strict quality control standards
  • Fits models with L4 1.8L Engine only
  • For models with Automatic Transmission only

Replace your broken mounts now with these great fitting aftermarket parts. They make great replacements and have good cost savings over dealer units.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Carbon black, which is known to the State of California to cause cancer.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Upper Torque Rod (0:21)
    • Place a piece of wood on a floor jack
    • Raise the jack underneath the oil pan slightly to support the engine
    • Remove the three bolts from the upper torque rod with a 17mm socket and breaker bar
    • Remove the counter weight and the upper torque rod
  2. step : Removing the Front Engine Mount (2:21)
    • Remove the 10mm bolt from the ground strap
    • Remove the 19mm bolt from the mount
    • Loosen the captured 19mm bolt from the mount
    • Remove the 17mm bolt from the mount
    • Carefully remove the mount
    • If the threads are stripped in the engine, tighten a 14/15 tap in the channel
    • Clean out the channel with compressed air
    • Thread the bolt by hand to test for compatibility
    • Remove the two 14mm bolts from the aluminum brace
    • Remove the two bolts on the mount to the frame rail
    • Remove the aluminum brace
  3. step : Installing the Front Engine Mount (9:31)
    • Remove the 17mm bolt from the new mount
    • Loosen the bolt on the brace against the wall with a 14mm socket and ratchet
    • Insert the aluminum brace into place
    • Tighten the 14mm bolts to the aluminum brace
    • Torque the two bolts to 36 foot-pounds
    • Tighten the bolts on the mount to the frame rail to 47 foot-pounds
    • Insert the mount into place
    • Tighten the bolts to the mount
    • Torque the three bolts to 52 foot-pounds
    • Insert the ground strap into place
    • Tighten the 10mm bolt to the strap
  4. step : Installing the Upper Torque Rod (14:58)
    • Insert the torque rod into place
    • Tighten the three bolts to the upper torque rod with a 17mm socket and ratchet
    • Torque the bolts to 47 foot-pounds
    • Lower the jack from the engine

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Center Punch
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Paper Towels

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • Complete Metric Socket Set

  • Sockets - SAE

  • Complete SAE Socket Set

  • Specialty Tools

  • Metric Tap and Die Set

5.00/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Honda Civic engine mount and trans mount kit
First off let me start off by saying the parts arrived packaged very well and secure. I have not ordered from you guys before but you just made a customer. Quick shipping and everything fit perfectly. I couldnt be happier. Well maybe if you guys were in Texas. I could be happier that way. Hahaha. Anyways. Thank you for great service and even better parts that fit like hey should. Will definitely spread the word and will order from you guys again for all my future purchases. Thanks again
March 11, 2017
2007 Honda Civic Motor Mounts
So far, so good. A bit a pain to install, but happy with the result. I could not identify which motor mount was bad, but my daughters car started getting the 4-cylinder shake which was never there before. Bought the motor mount kit and the shake is gone!
April 3, 2017
Motor Mounts
A1 Auto I am so glad that I found out about you.. I have already told all my relatives and friends that A1 Auto is the only way to go for Service, Quality and and the best Prices. Thank you A1 Auto. Robert- La Quinta- Ca.
January 9, 2018
Motor mounts
I was extremely happy with how fast the shipping was when the parts arrived they were identical to the parts removed couldnt have been happier with both what the quality appears to be and the price
April 30, 2018
On time delivery and was as described love doing business with this seller
October 6, 2018
Finally happy to get fix
Great quality and price and the video on how to awesome
November 3, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2006-2011Honda Civic Honda Civic Engine & Transmission Mount Kit 4 Piece Set L4 1.8L with Automatic Transmission
Only 2 left in stock
Part #: 1AEEK00221

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(16:15 min)