Replaces

2006-11 Honda Civic CV Axle Shaft - 1AACV00353

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

 

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:22)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Axle Nut (0:52)
    • Insert a punch into the divet
    • Tap the punch with a hammer
    • Have an assistant hold the brakes
    • OR Remove the center cap
    • Replace the wheel
    • Thread the lug nuts on
    • Lower the vehicle to the ground
    • Loosen the axle nut with a 32mm socket and breaker bar
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Thread the nut on a few turns
  3. step : Removing the Axle (2:50)
    • Remove the 17mm bolts from the control arm
    • Separate the lower ball joint from the control arm with a pry bar
    • Tap the end of the axle with a hammer
    • Remove the axle from the knuckle
    • Have a drain pan ready
    • Pry the axle out of the transmission
  4. step : Installing the Axle (7:10)
    • Insert the axle shaft into the transmission
    • Tap the axle in with a dead blow hammer
    • Insert the axle into the knuckle
    • Tighten the axle nut by hand
    • Insert the ball joint into the knuckle
    • Tighten the 17mm bolts to the control arm
    • Torque the nuts to 43 foot-pounds
    • Tighten the axle nut with a ratchet
  5. step : Reattaching the Wheel (10:52)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern
    • Tighten the hub nut to 134 foot-pounds
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Hammer
  • Center Punch

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 32mm Socket
  • 17mm Socket
  • 19mm Socket

  • Specialty Tools

  • Dead Blow Hammer

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2006-2011Honda Civic Honda Civic SI Front CV Axle Shaft Passenger Side L4 2.0L
Part #: 1AACV00353

Out of Stock

How-to Video:

(11:49 min)