Replaces

2006-11 Honda Civic CV Axle Shaft Driver Side TRQ CSA82158 - 1AACV00126

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:24)
    • Loosen the lug nuts with a 19mm socket with the vehicle on the ground
    • Pry off the center cap with a flat blade screwdriver
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Axle Nut (0:58)
    • Fit a flat blade screwdriver into the axle nut opening
    • Tap the screwdriver with a hammer
    • Secure the hub with a pry bar
    • Loosen the axle nut with a 32mm socket and breaker bar
  3. step : Removing the Axle (2:43)
    • Loosen the three 17mm bolts holding the ball joints to the control arm
    • Pry the control arm down with a pry bar
    • Tap the axle with a dead blow mallet
    • Remove the axle nut
    • Pull the axle out of the knuckle
    • Have a drain pan ready
    • Pry the axle out of the transmission
  4. step : Installing the Axle (6:15)
    • Seat the axle into the transmission
    • Tap the axle into the transmission with a dead blow mallet
    • Insert the axle into the knuckle
    • Reinstall the ball joint into the control arm
    • Tighten the three 17mm bolts to the ball joint
    • Torque the bolts to 43 foot-pounds
  5. step : Installing the Axle Nut (10:15)
    • Tighten the axle nut with a 32mm socket and ratchet
  6. step : Reattaching the Wheel (10:42)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern
    • Tighten the hub nut to 134 foot-pounds
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Hammer
  • Center Punch

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 32mm Socket
  • 17mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2011 Honda Civic CV Axle Shaft Driver Side L4 1.8L with Automatic Transmission TRQ CSA82158

This part replaces:

  • A1 Cardone 66-4232
  • Reference Number NCV36568
  • TRQ CSA82158
Part #: 1AACV00126


TRQ
Brand #: CSA82158

How-to Video:

(12:11 min)