2006-11 Honda Civic Control Arm - 1ASRU00072

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This replacement rear upper control arm is just what you need to bring back the safety and integrity of your vehicle's suspension.


  • Fits the LH (Driver Side) REAR UPPER
  • Direct replacement
  • Built to strict quality control standards 

Note:  This arm is the revised arm offered for 2008+ models 

Worn control arm bushings can cause excessive tire wear, popping or creaking in the rear end, extra play in the suspension system, and pose a serious safety concern. Replace that damaged rear upper control arm with the loose bushings & worn ball joint with our high quality all in one replacement.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:26)
    • Loosen the lug nuts with the vehicle on the ground with a 17mm socket and breaker bar
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Upper Control Arm (1:05)
    • Remove the bolt form the knuckle with a 14mm socket and ratchet counterhold with a 19mm socket and ratchet
    • Tap the bolt out with a hammer and punch if needed
    • Remove the two 14mm nuts from the control arm
    • Remove the control arm
  3. step : Installing the Upper Control Arm (5:02)
    • Insert the control arm up into place
    • Tighten the 14mm bolts to the control arm by hand
    • Tighten the 14mm bolt to the knuckle by hand, tapping it in with a hammer if needed
    • Tighten the 14mm bolt in the knuckle with a socket and ratchet
    • Tighten the two 14mm bolts
    • Jack up the suspension to simulate the weight
    • Tighten the bolt in the knuckle to 80 foot-pounds
    • Tighten the bracket bolts to 43 foot-pounds
  4. step : Reattaching the Wheel (8:26)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Center Punch
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2006-2011Honda Civic Honda Civic Rear Upper Control Arm Driver Side
Only 9 left in stock
Part #: 1ASRU00072

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:34 min)