Replaces

2006-11 Honda Civic Brake Kit Nakamoto CD537, CD465A, 31311-DSZ, 31420-DSZ - 1APBS00419

Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a Set of 4
    • Includes both LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Stud Wheels
  • Front 10.3" (261mm) diameter vented
  • Rear 10.2" (260mm) diameter solid (not vented) rotors

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi
  • Brake Rotor Coating: Zinc Coated
  • Brake Rotor Type: Cross Drilled & Slotted
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Kit Includes: (2) Rear Performance Brake Rotors
  • Front Brake Rotor Specifications: 10.28" (261mm)
  • Front Brake Rotor Specifications: Vented
  • Rear Brake Rotor Specifications: Solid
  • Front Brake Rotor Specifications: 5 Lug
  • Rear Brake Rotor Specifications: 10.24" (260mm)
  • Rear Brake Rotor Specifications: 5 Lug
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:48)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads and Rotor (1:52)
    • Remove the two Phillips screws from the rotor
    • Unbolt the two 12mm caliper bolts from the caliper bracket
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Remove the brake pads
    • Unbolt the 17mm bolts from the caliper bracket
    • Remove the caliper bracket
    • Remove the rotor
  3. step : Installing the New Brake Pads and Rotor (4:30)
    • Clean the rotor with brake parts cleaner
    • Mount your new rotor onto the hub
    • Apply a dab of anti-seize grease to the Phillips screws
    • Tighten the Phillips screws to the rotor
    • Clean the brake pad slides with a wire brush
    • Mount the caliper bracket onto the rotor
    • Apply grease to the brake pad tabs
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Apply grease to the caliper bolts
    • Thread bolts by hand
    • Torque the caliper bracket bolts and the caliper bolts to 74 foot-pounds
  4. step : Reattaching the Wheel (8:20)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 19mm Socket

4.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
0
0
0
Service
I did get my brake kit and when I got it I got it on a Tuesday like it said and I was very pleased with the service I definitely will be buying more parts from u guys
June 18, 2018
Purchased
1 month ago
Great kit.
Great product. Easy to install. Fast delivery! Very satisfied customer!!!!
January 28, 2018
Purchased
6 months ago
You are Awesome!
I can't thank you enough! It started with the amazing customer service I received when I telephoned your company. The gentleman that helped me was kind, professional, and and explained everything to me. The parts arrived on time and more than met not only my expectations, but my mechanic was also very impressed. You will continue to receive all of my business and I have already referred several friends and family members to your company. Thanks again!
November 1, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
HI, I have a 2011 Honda Civic Sedan LX, will these work for that? Thank you!
Danielle T on Jan 14, 2017
BEST ANSWER: This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit. Please feel free to call our customer service department for clarification @ 888-844-3393.

Vehicle Fit

  • 2006-2011 Honda Civic EX Coupe Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
  • 2006-2011 Honda Civic EX Sedan L4 1.8L (excluding Japan Built Models) Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD537, CD465A, 31311-DSZ, 31420-DSZ
Only 1 left in stock
Part #: 1APBS00419

Nakamoto
Brand #: CD537, CD465A, 31311-DSZ, 31420-DSZ

How-to Video:

(10:07 min)