Specifications:

  • Fits LH (Driver Side)
  • Power operation glass
  • Manual folding
  • Textured black finish
  • Injection molded black plastic housing
  • Direct replacement
  • Built to strict quality control standards

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed, the mirror may not function properly.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (1:10)
    • Disconnect the negative battery cable.
    • Remove the two Phillips screws behind the door pull.
    • Pull the panel out.
    • Disconnect the harnesses.
    • Remove the Phillips screws and disconnect the power window switch.
    • Remove the two Phillips screws in the door panel.
    • Lift the door panel up and off.
  2. step : Removing the Side Mirror (4:33)
    • Carefully peel off the water shield (If the truck has power mirrors).
    • Remove the 6mm bolts that secure the speaker.
    • Remove the speaker.
    • Disconnect the mirror harness.
    • Remove the three 11mm nuts that secure the mirror.
    • Pull the mirror out and off.
  3. step : Replacing the Side Mirror (6:08)
    • Feed the harness down through the door.
    • Line up the mirror and push it into place.
    • Replace the three 11mm nuts.
    • Reconnect the mirror harness.
    • Replace the speaker and the 6mm bolts that secure it.
    • Replace the water shield.
  4. step : Replacing the Door Panel (7:36)
    • Push the door panel down into place.
    • Replace the two Phillips screws in the door panel.
    • Reconnect the power window switch to the switch panel and replace the screws.
    • Reconnect the other harnesses to the switch panel.
    • Line up the panel and push it into place.
    • Replace the two Phillips screws under the door pull.
    • Reconnect the negative battery cable.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 6mm Socket
  • 11mm Socket

  • Wrenches - Metric

  • 8mm Wrench

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
excellant fit and finish
timely arrival product was exactly as stated .looks great, works great.
August 23, 2017
Purchased
8 months ago
FORD RANGER Driver side mirror 2010 model
Installation was easy following the video guide. Some minor differences, my 2010 only had two screws (and somewhat different location than the older model in the video) and the handle to remove...this model fit perfectly and it is great to have a good mirro once again. I had a similiar problem with a 2001 RANGER and installation was a little more difficult and the mirror did not align as well as this newer did. 1AAuto has saved me on labor and parts several times over the years. J.R. Clinton
August 2, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2011 Ford Ranger Power Manual-Folding Textured Black Mirror Driver Side

This part replaces:

  • Partslink FO1320282
  • Hollander 128-00891CL
  • OE # 6L5Z17683AA
Part #: 1AMRE01654



How-to Video:

(08:45 min)