Specifications:

  • Brand New Lighting Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Fit guaranteed

  • This headlamp will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.

Quality

  • 1A Auto has the most comprehensive warranty.
  • If this headlight should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.

Value

  • Replacing a discolored, scratched, dull or damaged headlight with a headlight from 1A Auto can increase your resale value by up to 10%.

Safety

  • A new headlight can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new headlight from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather..
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

    DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb. Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.

  1. step : Remove the headlight assembly (0:49)
    • Pull up on the two tabs above the headlight assembly
    • Pull out the headlight assembly.
    • Unplug the harness.
    • Replace the bulbs if that is all that is needed, otherwise replace the entire assembly.
  2. step : Install headlight assembly (1:46)
    • Adjust the adjustor bolts to match the old assembly.
    • Plug the bulbs and harness into the new headlight assembly
    • Put the headlight assembly into place.
    • Push down the tabs.

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2011 Ford Ranger 4 Piece Set Lighting Kit

This part replaces:

  • TYC 20-6014-00-1
  • TYC 20-6013-00-1
  • Hollander 114-00650L
  • Hollander 114-00649R
  • Hollander 116-03204BL
  • Hollander 116-03203BR
  • OE # 3L5Z 13008 CA
  • OE # 3L5Z 13008 BA
  • OE # 6L5Z 15A201 BA
  • OE # 6L5Z 15A201 AA
  • Partslink FO2502173
  • Partslink FO2503173
  • Partslink FO2530171
  • Partslink FO2531171
Part #: 1ALHT00065



How-to Video:

(04:15 min)