Replaces

2006-11 Ford Focus Strut & Spring Assembly Pair - 1ASSP00975

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Accessing the Shocks and Struts (1:03)
    • Loosen the lug nuts on the wheel while the car is on the ground
    • Jack the car up and remove the lug nuts and wheel
    • Pull the brake line from the bracket
    • Pull the ABS sensor out of its bracket
    • Remove the bolt on the upper stabilizer link. Spray with penetrating oil
    • Spray the bolt on the back side of the strut with penetrating oil
    • Use a socket to remove the 15mm bolt on the steering knuckle
  2. step : Removing the Strut (4:27)
    • Spray penetrating oil where the strut connect with the steering knuckle
    • Use a 15mm socket to disconnect the tie rod. Use a jack and some wood to hold the tie rod up to help remove the bolt
    • If the vehicle has a broken spring lift up on the strut and hammer the steering knuckle until it loosens
    • Lift the strut up and out of the steering knuckle
    • Remove the three 13mm bolts up in the engine compartment
    • Pull the strut free
  3. step : Installing a New Strut (6:40)
    • With the clip on the bottom of the strut facing inward, put the strut into place
    • Replace the bolts in the engine compartment
    • Pull the steering knuckle out and slide it on to the bottom of the strut
    • Replace the bolt that connects the strut to the steering knuckle. Do not tighten fully
    • Make sure the steering knuckle is below the taper on the strut
    • Make sure its at the right depth and moves properly
    • Tighten the bolt on the steering knuckle to between 65 and 70ft/lbs
  4. step : Reconnecting the Brackets and Sensors (9:52)
    • Put the brake line back in place
    • Put the tie rod back in place and replace the nut
    • Replace the stabilizer link and bracket. Tighten the nut
    • Put the ABS sensor back in place
    • Jack the tie rod up and tighten the nut to 55 to 60ft/lbs
    • Replace the wheel and thread the lug nuts
    • Lower the car and tighten the lug nuts to 100ft/lbs in a crossing pattern
    • Tighten the bolts in the engine compartment to between 25 and 30ft/lbs

Tools needed for replacement:

    General Tools

  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket
  • 17mm Socket
  • 19mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

  • Wrenches - Metric

  • 17mm Wrench

4.9 / 5.0
10 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
9
1
0
0
0
Great product and great service
This product is a cost effective replacement part which eliminates having to take the strut assembly apart. Just take out the old assembly and bolt in the new one and that's it. I have taken off the springs and replaced just the strut unit itself and that's was a pain, not to mention dangerous due to my diy tools. This is a much better option. I am extremely pleased.
April 30, 2018
Purchased
11 months ago
Great Service!
Great service and fast delivery!! Good quality parts definitely will shop again.
April 6, 2018
Purchased
4 months ago
Suspension feels way tighter. My old one were pretty worn out and I didn't realise it until now. Thank you!
March 17, 2018
Purchased
4 months ago
Good price
Easy enough to install and great price point. Working well.
March 8, 2018
Purchased
9 months ago
Couldn’t be happier
Unbeatable price, especially compared to Motorcraft brand. Super easy install, especially with video. Highly recommend doing it yourself!
February 16, 2018
Purchased
5 months ago
2006 focus
Very easy to install and great quality for the money. I really enjoyed ordering from this company. Parts came ahead of time. The packaging was great not damaged at all. Overall a great experience. Next time I need anything for my car I will look here first.
October 30, 2017
Purchased
9 months ago
Perfect Fit
I had more trouble taking the old one off then putting the new one on. Only change I would recommend is labeling which side is passenger vs driver side for easier identification . Easy installation for the DIYs out there.
August 9, 2017
Purchased
11 months ago
Excellent service
No problem what so ever fast shipping , thank you , mike from credit auto sales inc
July 26, 2017
Purchased
1 year ago
Easy drop in replacement.
Order arrived next day, much quicker than expected. Parts are identical to factory installed struts on my 2007 Ford Focus. Took about 45 minutes using pneumatic tools. They provide comparable ride and handling after a day or two of settling in. 1A Auto has a very good "How To" video on YouTube, watch it for very good instructions.
February 28, 2017
Purchased
1 year ago
Great Product , Great price !
These struts are absolutely perfect in every way. The price, the fit on the vehicle and the shipping were all outstanding. I installed these on my wife's car and were an immediate success for me and her. She really noticed the improved ride.
Thank you !!!!!
February 13, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 10 answers
Is this a pair or just one?i
Carson B on Jun 25, 2018
BEST ANSWER: When I bought it was a pair andthey work hreat!
Do these require a special camber/caster shims and strut plate?
Tony F on Dec 30, 2017
BEST ANSWER: No
Just disconnect anything attached to the strut and then unbolt the 2 bolts on the hub assembly and the 3 up on top. the whole assembly will come out!!
What brand of struts are these and are they oem?
Bobby T on Apr 17, 2017
BEST ANSWER: These are our 1A Auto brand parts, and are made to meet or exceed OE specifications from an aftermarket company.

Vehicle Fit

  • 2006-2011 Ford Focus Front Strut & Spring Assembly Pair

This part replaces:

  • Monroe 272258
  • Monroe 272257
  • KYB SR4236
  • KYB SR4235
Part #: 1ASSP00975

How-to Video:

(13:03 min)