Replaces

2006-10 Honda Civic Brake Kit Front Nakamoto MD465, 31311 - 1ABFS01447

This front brake pad & rotor kit is just what you need to get your vehicle stopping in good order again!

Brake Pad Set Specifications:

  • 4 Piece FRONT Brake Pad Set
  • Direct replacement
  • Professional Grade SEMI-METALLIC Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 45251-SNA-000, 45251-SNA-A00, 45251-SNE-A00, 45251-SZT-020, 45251SNA000, 45251SNAA00, 45251SNEA00, 45251SZT020
  • Fits 5 Stud Wheels
  • 10.3" (261mm) Diameter Vented Rotors

This front brake pad & rotor kit makes a great replacement and has excellent value over the price of dealer parts.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:48)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads and Rotor (1:52)
    • Remove the two Phillips screws from the rotor
    • Unbolt the two 12mm caliper bolts from the caliper bracket
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Remove the brake pads
    • Unbolt the 17mm bolts from the caliper bracket
    • Remove the caliper bracket
    • Remove the rotor
  3. step : Installing the New Brake Pads and Rotor (4:30)
    • Clean the rotor with brake parts cleaner
    • Mount your new rotor onto the hub
    • Apply a dab of anti-seize grease to the Phillips screws
    • Tighten the Phillips screws to the rotor
    • Clean the brake pad slides with a wire brush
    • Mount the caliper bracket onto the rotor
    • Apply grease to the brake pad tabs
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Apply grease to the caliper bolts
    • Thread bolts by hand
    • Torque the caliper bracket bolts and the caliper bolts to 74 foot-pounds
  4. step : Reattaching the Wheel (8:20)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 19mm Socket

4.3 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
2
0
0
0
Great product fast shipping
I would very much recommend this product and this company in general. Shipping was fast and accurate.
March 3, 2017
Purchased
1 year ago
Excellent value
I have put about 1000 miles on these pads and rotors with all new hardware and properly greased. Professionally installed by me (Former Honda tech current Jag Land Rover tech.) rotors are true no steering wheel shake at any speeds when applying brakes. No brake squeaks so far. My only complaint was the pads are just barely smaller so if you go from reverse to drive or vice versa, quickly there is a very slight knock noise. So for $60 for pads and rotors I am extremely satisfied.
August 10, 2017
Purchased
7 months ago
Good reliable and thanks
Good reliable thank you good for the partshcxttxuxfkgxitxutfurdhdzjtzjtdjtditsirsytiditditdjtxutxit
July 7, 2017
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(10:07 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 19mm Socket



This part replaces:

  • Nakamoto MD465, 31311

Vehicle Fit

  • 2006-2010 Honda Civic Front Premium Posi Semi-Metallic Brake Kit excluding SI Models excluding GX Models excluding Hybrid Models Nakamoto
Part #: 1ABFS01447

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD465, 31311

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More