Replaces

2006-10 Honda Civic Brake Kit Nakamoto CD465A, 31311 - 1ABFS00787

This front brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Ceramic Enhanced Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a PAIR
  • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 45251SNA000, 45251 SNA 000, 45251SNAA00, 45251 SNA A00, 45251SNEA00, 45251 SNE A00, 45251SZT020, 45251 SZT 020
  • Fits 5 Stud Wheels
  • Vented
  • 10.3" (261mm) diameter

This brake rotor & pad set makes great replacements and has excellent value over the price of dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:25)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads and Rotor (0:58)
    • Pull the caliper to the outside of the vehicle to apply pressure to the piston
    • Counter hold the slide pins with a 19mm wrench
    • Loosen the 12mm bolts from the caliper
    • Slide the caliper off and secure it with a bungee cord
    • Remove the brake pads from the caliper
    • Remove the 17mm bolts from the caliper bracket
    • Remove the two Phillips head screws from the rotor
    • Remove the rotor
  3. step : Installing the Brake Pads and Rotor (5:24)
    • Clean both sides of the rotor with brake parts cleaner
    • Place the rotor on
    • Tighten the Phillips screws to the rotor
    • Grease the slide pins
    • Insert the caliper bracket on
    • Tighten the bolts to the caliper bracket
    • Place caliper grease on the brake pads
    • Insert the brake pads into place
    • Compress the piston on the brake caliper
    • Place the brake caliper on
    • Tighten the bolts to the caliper
    • Torque the bolts to 25 foot-pounds
    • Torque the caliper bracket bolts to 85 foot-pounds
  4. step : Reattaching the Wheel (9:29)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern
  5. step : Testing the Brakes (10:00)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Rubber Mallet

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner
  • Paper Towels
  • Bungee Cord

  • Ratchets & Related

  • Socket Extensions
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 19mm Socket

  • Specialty Tools

  • Dead Blow Hammer

  • Wrenches - Metric

  • 17mm Wrench
  • 19mm Wrench
  • 12mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Excellent
Excellent customer services I will continue getting parts from them
Keep up the work
August 7, 2017
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2010 Honda Civic (excluding GX Models) (excluding Hybrid Models) (excluding SI Models) Front Premium Posi Ceramic Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD465A, 31311
Part #: 1ABFS00787



Nakamoto
Brand #: CD465A, 31311

How-to Video:

(10:25 min)