Replaces
Frequently bought together
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Hi guys, it's Sue from 1AAuto, and today we're going to be installing our main window switch in our 2007 Mazda 6.
To start with, we're going to remove the main power switch here so that we can replace it. I use a plastic body tool. You just need to get down in between there and twist it. It pops right up. Now that is exposed, and you just disconnect these three connectors. They all have push tabs on them, so we're going to push down. Let me get a small screwdriver. I like to use a pocket screwdriver flathead. If you have a small flathead, you can use that.
I see someone broke the tab, so I have to guide this down in there and push. Yeah, they broke the tab right off. So now with that disconnected, we have the main switch. So once you have your main switch out with the casing cover, to remove the switch from the cover, use a T20, that's a Torx Bit 20 socket or screwdriver, and you back out the three screws. It's not difficult, but you want to take just caution because everything is plastic. And then it just slides right out.
Now here's your broken switch that's completely broken. And here's our new switch from 1AAuto.com. It has the left and right mirror control, the lock the window control, and you have two auto buttons on the front for the front windows, and the switches for the rear windows. So if you need this part, or any part for your car, come on over to 1AAuto.com.
So to reinstall, we're just going to reverse procedure. I'm going to click all the connectors back in. That's the control for the mirror. This little one, and then the back one. And now that that clip is broken, we're going to see how if it will lock into place. Yep. Did. That's good. So now, you're just going to tuck the wires down in. This particular model doesn't have a nose clip that has like a horn that slides under. These are all straight down clips, so you're just going to line it up and push it straight down. And you're ready to go.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
