Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Blacked-out Backgrounds
  • Replaces dealer part numbers: 7L3Z-13008-HA, 7L3Z-13008-EA, 7L3Z13008HA, 7L3Z13008EA
  • Includes lenses & housings
  • Direct replacements
  • Built to strict quality control standards
  • Do not include bulbs
  • Correct style for Harley Davidson models
    • Will fit all 04-08 New Body Style F150's
These headlights are great replacements and have good cost savings over headlights from the dealer.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs. Occasionally lighting manufacturers do leave test bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, Parking light, Fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Handling the Bulbs (0:35)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : Remove the old head light assembly (0:52)
    • Pop the hood and secure it.
    • Unscrew the small screw securing the gasket on the side of the head light assembly.
    • Remove the two 10 mm screws securing the head light assembly.
    • Remove the Phillips screw at the top of the headlight assembly.
    • Pull up on the clip at the top of the head light assembly and remove it.
    • Unplug the bulbs and harness.
  3. step : Install the new head light assembly (3:15)
    • Plug in your bulbs, replacing them with new ones if necessary.
    • Reconnect the harness by clipping it in.
    • Line up the head light assembly and clip it into place.
    • Bolt in the Phillips screw and the two 10 mm bolts with your socket and ratchet.
    • Secure the gasket with your Phillips screwdriver.
    • Close the hood and enjoy your new 1A Auto headlights.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2008 Ford F150 Truck Harley Davidson Edition Headlight Pair
Only 2 left in stock
Part #: 1ALHP00995

How-to Video:

(05:00 min)