Replaces

2006-08 Dodge Ram 1500 Truck Shock Absorber - 1ASSP01541

Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Shock (0:58)
    • Jack up the truck (optional).
    • Spray penetrating oil on the bolts of both shocks.
    • Use two 21mm sockets with a breaker bar or pipe for leverage on the bolt at the bottom of the shock.
    • Do NOT remove the bolt yet. Just the nut.
    • Remove the nut from the top bolt.
    • Carefully remove the bottom bolt, then the top bolt and pull the shock free.
  2. step : Installing New Shock (5:42)
    • Put the new shock into place.
    • Put the top bolt through and start the nut.
    • Put the bottom bolt on and start the nut.
    • Tighten the nuts to about 70 to 75 foot-pounds of torque.

Tools needed for replacement:

    Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Sockets - Metric

  • 21mm Socket

  • Wrenches - Metric

  • 21mm wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2008 Dodge Ram 1500 Truck excluding Mega Cab 4 Wheel Drive Front & Rear Shock Absorber 4 Piece Set

This part replaces:

  • Monroe 37207
  • KYB 344385
Part #: 1ASSP01541



How-to Video:

(07:05 min)