1ASFK02030-2005 Jeep Liberty Steering & Suspension Kit 8 Piece Set

Replaces

2005 Jeep Liberty Steering & Suspension Kit 8 Piece Set TRQ

1ASFK02030

Part Details

  • Quantity: 8 Piece Set
  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Upper Control Arms with Ball Joints
  • Kit Includes: (2) Front Inner Tie Rods

This part replaces:

  • Dorman 520-354
  • Hollander 511-01060
  • Moog ES3535
  • Moog ES3536
  • Moog K3198
  • Moog EV800407
  • Moog K80767
  • OE # B
  • OE # 5110437AA-AI
  • OE # AE
  • OE # 5069161AB
  • OE # 5114037AH
  • OE # 52088632AC
  • OE # 5069161AA
  • OE # 5110437AB
  • OE # 5114037AI
  • OE # 5110437AF
  • OE # 5072445AA
  • OE # 5072444AA
  • OE # 5114037AD
  • OE # 5114037AC
  • OE # 52128517AA
  • OE # 5110437AA
  • OE # 5114037AE
  • OE # 52128517AE
  • OE # 5110437AG
  • TRQ PSA85427
FREE SAME DAY SHIPPING
Save 16%
List: $184.95 Save: $30.00
Only 9 left in stock
Part 1ASFK02030
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA85427

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Quantity:   8 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Front Outer Tie Rods
      (2) Front Upper Control Arms with Ball Joints
      (2) Front Inner Tie Rods

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

    Regarding alignments, it's suggested that you have an alignment performed after you do a replacement like this.

  1. step : Testing the Tie Rod (0:15)
    • Jack up one of your front wheels
    • Grab it by the sides of the tire and try to move it back and forth. If you feel more play than just the steering rack moving back and forth, then your tie rod probably needs replacing
  2. step : Removing the Front Wheel (0:56)
    • If you don't have air tools, you'll want to loosen the lug nuts with the wheel on the ground
    • Lift the vehicle with a jack, support it with a jack stand, and take the wheel off the rest of the way
  3. step : Measuring the Tie Rod (1:19)
    • Before you disassemble the tie rod, you want to measure the tie rod
    • From a fixed point on the rack, like the end of the boot, you want to measure to the middle of the tie rod
    • Measure a few times to be sure-you're going to set the new tie rod up the same length
  4. step : Removing the Tie Rod (1:58)
    • You'll see a lock nut at the end of the tie rod. Holding on to the tie rod with a wrench, use your adjustable wrench to loosen that nut about a quarter of a turn
    • There is also am 18 mm bolt that nut that holds the stud on. Remove that
    • Separate the tie rod from the steering knuckle by using a tie rod fork. Taking a hammer, you'll drive the tie rod fork between the rod and the knuckle
    • Once the tie rod is separated from the knuckle, turn it clockwise to get it off the steering rack
  5. step : Replacing the Tie Rod (3:45)
    • The new tie rod should come with the bolt in it. Take the bolt out for now.
    • Thread the tie rod onto the nut, measure from the same fixed point as before and make sure it measures the same. Take a couple of measurement.
    • Also, make sure you do not twist the shaft that comes out of the steering rack. Doing so will change your alignment.
  6. step : Securing the New Tie Rod (4:39)
    • Once you have the measurement correct, then you can put the tie rod back into the steering knuckle and start the bolt on there
    • The lock nut at the end of the tie rod is an 18 mm nut. Holding the stud of the tie rod with an 8 mm wrench, tighten up the nut with your 18 mm wrench
    • Once the 18 mm wrench is tight, grab another wrench and hook it on there for leverage. Give it another pull just for good measure
    • Torque it to 65 foot pounds
    • Put your wrench onto the inner tie rod to get this locking nut back out against the outer tie rod. Tighten
  7. step : Replacing the Wheel (5:53)
    • Turn the wheels straight, and put your wheel and tire back on
    • Start the lug nuts by hand at first to primarily tighten them.
    • Lower the car back onto the ground
    • Set your torque wrench to 90 - 95 foot pounds and tighten your lug nuts in a star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Tie Rod Fork

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2005Jeep Liberty Jeep Liberty Steering & Suspension Kit 8 Piece Set

Part Interchange

Brand Label Part Number
CARQUEST CA001B
Centric Parts 623.58001
Chrysler 52088632AB
Chrysler 68068615AB
Chrysler 68068615AA
Chrysler 52088632AC
Chrysler 52088632AA
DIY Solutions SUS01977
DIY Solutions SUS07747
DIY Solutions SUS07560
DIY Solutions SUS05113
DIY Solutions SUS00297
DIY Solutions SUS07561
Dorman 520-354
Dorman - OE Solutions 520-354
Dorman OE Solutions 520-354
Falcon Steering Systems FK3198
Ingalls Engineering CAK3198
Jeep 5072444AA
Jeep 5110437AF
Jeep 5069161AA
Jeep 5114037AD
Jeep 5114037AI
Jeep 5114037AE
Jeep 5110437AG
Jeep 5114037AC
Jeep 5072445AA
Jeep 5069161AB
Jeep 5110437AB
Jeep 5110437AA
Jeep 5114037AH
MAS Industries CB3198PR
MAS Industries CB3198
MOOG EV800407
MOOG K3198
MOOG K80767
MOOG ES3536
MOOG ES3535
MOOG X3198
MOOG CK3198
MOOG RK3198
MOOG Chassis Products EV800407
MOOG Chassis Products K80767
MOOG Chassis Products X3198
MOOG Chassis Products CK3198
MOOG Chassis Products ES3535
MOOG Chassis Products ES3536
MOOG Chassis Products RK3198
MOOG Chassis Products K3198
MasterPro 8CB28117
Mcquay-Norris FA4092
Mevotech CMK3198
Mevotech MK3198
Mevotech GK3198
NAPA 260-5161
NAPA Premium 2605161
Precision Driveline CB28001
Precision Driveline 8CB28001
Raybestos Chassis 502-1039
SYD 52088632RL

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: PSA85427
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


2005 Jeep Liberty Steering & Suspension Kit 8 Piece Set TRQ-1ASFK02030 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.