Part Details

  • Quantity: 6 Piece Set
  • Kit Includes:
    (2) Front Lower Ball Joints
    (2) Front Upper Control Arms with Ball Joints
    (2) Front Sway Bar Links

Specifications:

  • Brand New Suspension Kit
  • Comes as an 6 Piece Set
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:40)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:15)
    • Apply rust penetrant to the sway bar link nuts
    • Remove the top sway bar link nut with a 21mm socket and ratchet
    • Remove the lower sway bar link nut with an 18mm socket and ratchet
    • If the nut spins, hold the nut with an 18mm wrench and loosen the stud with an 8mm socket and ratchet
    • Remove the 12mm bolts from the axle
    • Push the axle to the side
    • Pull out the sway bar link
  3. step : Installing the Sway Bar Link (2:43)
    • Put the sway bar link into place
    • Fasten the 21mm nut onto the top of the sway bar link
    • Put the axle into place
    • Insert the 12mm bolts into the axle
    • Tighten the 12mm bolts to 60 foot-pounds of torque in a crossing or star pattern
    • Fasten the 18mm nut onto the bottom of the sway bar link
  4. step : Reattaching the Wheel (4:07)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 120 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • A Piece of Pipe (for leverage)

  • Sockets - Metric

  • 21mm Socket
  • 8mm Socket
  • 10mm Socket
  • 12mm 12-Point Socket

  • Wrenches - Metric

  • 21mm wrench
  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2005Ford F150 Truck Ford F150 Truck 4 Wheel Drive (Built Before 11/29/04 Production Date) 6 Piece Set Suspension Kit

This part replaces:

  • Moog K80149
  • Moog K80306
  • Moog K80308
  • Dorman 520-285
  • Dorman 520-286
  • Hollander 511-01089L
  • Hollander 511-01087R
  • Moog K80279
  • OE # 6L3Z3085AL
  • OE # 4L3Z5K483BA
  • OE # 2L1Z3050A
  • OE # 6L3Z3084AR
Part #: 1ASFK05003


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:56 min)