Replaces

2005 Chevy Monte Carlo Brake Kit Nakamoto MD699, MD698, 55039, 55149 - 1ABFS02305

Brake Pad Specifications:

  • Premium Posi Semi Metallic Disc Brake Pads
  • 4 Piece Front Brake Pad Set
  • 4 Piece Rear Brake Pad Set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Fits 5 Stud Wheels

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:41)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:08)
    • Remove top 14mm bolt from the brake caliper and loosen the bottom bolt
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  3. step : Installing the New Brake Pads (1:59)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Clean the slides with a wire brush
    • Apply brake grease to the brake pads
    • Install the new brake pads into the bracket
    • Hammer the caliper on
    • Tighten the 14mm bolts to the caliper
  4. step : Reattaching the Wheel (3:32)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket
  5. step : Testing the Brakes (4:18)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Hammer
  • Wire Brush
  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005 Chevy Monte Carlo (Built After VIN 59148924) Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto

This part replaces:

  • Hollander 533-02339
  • OE # 25956847
  • OE # 88964116
  • Nakamoto MD699, MD698, 55039, 55149
Part #: 1ABFS02305



Nakamoto
Brand #: MD699, MD698, 55039, 55149

How-to Video:

(04:48 min)