Replaces

2005 Chevy Monte Carlo Brake Kit Nakamoto CD698, CD699, 55039, 55149 - 1ABFS02304

Brake Pad Specifications:

  • 4 Piece Front Brake Pad Set
  • 4 Piece Rear Brake Pad Set
  • Includes shims
  • Direct replacements
  • Professional Grade Ceramic Enhanced Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Fits 5 Stud Wheels

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Kit Includes: (2) Rear Replacement Brake Rotors
  • Rear Brake Rotor Specifications: Solid
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 5 Lug
  • Front Brake Rotor Specifications: 11.93" (303mm)
  • Rear Brake Rotor Specifications: 10.94" (278mm)
  • Rear Brake Rotor Specifications: 5 Lug

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Brake Caliper (1:12)
    • Pry center cap or hubcap to access and remove the lug nuts
    • Jack up the car and remove the wheel
    • Place a screw driver or pry bar into the hole on the caliper and pry out so that the piston drops into the caliper
    • Undo the two 15mm bolts on the back of the caliper
    • Pull caliper off, using a screw driver to pry it off if necessary
    • Secure caliper bracket safely to avoid stressing the brake line
  2. step : Removing the Caliper Bracket and Rotor (3:08)
    • Pry brake pads out of the caliper bracket
    • Remove the two 15 mm bolts on the back side of the caliper bracket (use pipe with the ratchet for more leverage)
    • Remove bracket and rotor
  3. step : Reinstallation of Brake Caliper (4:17)
    • Replace rotor and secure with a lug nut
    • Replace the caliper bracket and tighten bolts to 90ft/lbs
    • Remove caliper bracket slides and clean with a wire brush
    • Slide brake pads into place
    • Pull caliper down and use a c-clamp to push the piston all the way into the caliper
    • Place the caliper back on to the bracket
    • Clean caliper bolts and add small amount of oil
    • Replace caliper bolts. Torque them to 50ft/lbs.
    • Remove lug nut and replace wheel.
    • Tighten lug nuts in a star pattern and replace cap.
    • Before driving, pump brakes until pedal goes solid.

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2005Chevy Monte Carlo Chevy Monte Carlo (Built After VIN 59148924) Front & Rear Premium Posi Ceramic Brake Kit Nakamoto

This part replaces:

  • Hollander 533-02339
  • Nakamoto CD698, CD699, 55039, 55149
  • OE # 25956847
  • OE # 88964116
Part #: 1ABFS02304


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD698, CD699, 55039, 55149

How-to Video:

(09:13 min)