Replaces

2005 Brake Kit Nakamoto CD699, CD714, 5599, 55149 - 1ABFS02300

  • Brake Pad Specifications:

    • 4 Piece Front Brake Pad Set
    • 4 Piece Rear Brake Pad Set
    • Includes shims
    • Direct replacements
    • Professional Grade Ceramic Enhanced Disc Brake Pads

    Brake Rotor Specifications:

    • Comes as a Set of 4
      • Fits LH (Driver Side) & RH (Passenger Side) Front & Rear
    • Fits 5 Stud Wheels

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Kit Includes: (2) Rear Replacement Brake Rotors
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 5 Lug
  • Front Brake Rotor Specifications: 11.93" (303mm)
  • Rear Brake Rotor Specifications: 11.06" (281mm)
  • Rear Brake Rotor Specifications: Solid
  • Rear Brake Rotor Specifications: 5 Lug

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:48)
    • Pry off the center cap by hand
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:17)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (2:13)
    • Remove the two 15mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (4:09)
    • Remove the two 15mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (5:05)
    • Slide the rotor on
    • Clean the brake pad slides with a wire brush
    • Put the bracket back into place
    • Start the two 15mm bolts by hand
    • Tighten the bolts to 80 foot-pounds of torque
  6. step : Installing the New Brake Pads (6:34)
    • Use a large C-clamp to push the pistons back
    • Install the new brake pads into the bracket
    • Clean and grease the caliper bolts
    • Put the caliper on
    • Thread the two 15mm bolts by hand
    • Tighten bolts to 50 foot-pounds
  7. step : Reattaching the Wheel (9:19)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (9:57)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Wire Brush
  • Large C-Clamp
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 15mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Quick shipment and great prices!
Outstanding customer service while ordering my parts. When Ups delivered the parts, the box was crushed but the parts were still intact except for missing lug nuts. I called and was shipped replacement lug nuts very quickly. I will definitely order again!
May 30, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005 Buick LeSabre Front & Rear Premium Posi Ceramic Brake Kit for Models with 16 Inch Wheels (Built after VIN 5U129026) Nakamoto
  • 2005 Pontiac Bonneville Front & Rear Premium Posi Ceramic Brake Kit (excluding GXP Models) (Built After VIN 129028) Nakamoto

This part replaces:

  • OE # 88964116
  • Nakamoto CD699, CD714, 5599, 55149
Only 2 left in stock
Part #: 1ABFS02300

Nakamoto
Brand #: CD699, CD714, 5599, 55149

How-to Video:

(10:31 min)