Replaces

2005-17 Honda Odyssey Sway Bar Link Pair - 1ASFK02459

Specifications:

  • Brand New Sway Bar Link
  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side) Front
  • Direct replacement
  • Built to strict quality control standards

 

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:58)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (1:35)
    • Turn the wheel by hand
    • Clean off the threads with rust penetrant and a wire brush if necessary
    • Hold the lower stabilizer link stud with a 14mm wrench
    • Remove the nut from the stabilizer link with a 15mm hex socket
    • If the nut strips out, hold it in place with locking pliers and sawzall it off
  3. step : Reinstalling the Stabilizer Link (3:41)
    • Push the stabilizer link into place
    • Start the nuts by hand
    • Tighten the nuts
    • Torque the nuts to 29 foot-pounds
  4. step : Reattaching the Wheel (4:19)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Sawzall

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench

4.3 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
1
0
The nuts didn't fit the posts.
They start threading easily, but get VERY hard before they're even run up. I realize that some manufacturers do this on purpose, i.e. make it a lock nut, but the appropriate torque for an M12 nut is ~70 ft-lbs. I got to that without even running the nuts down.

You can certainly reuse the nuts from the old tie links... IF they're in good shape & they come off undamaged. Some of mine were ok & some were not, so I had to procure M12-1.25 nuts & M12 washers to install these parts. If you don't live near a well-equipped hardware store, you may find yourself disappointed when you try to install these tie-rods.
May 18, 2018
Purchased
3 months ago
Perfect fit
The sway bar link pair for my Odyssey fit perfectly. Having the ability to tighten the nut on the stud with two wrenches instead of using an Allen wrench made the installation much easier.
April 29, 2018
Purchased
4 months ago
Perfect Fit 2009 Honda Odyssey
The parts arrived within 6 days (free shipping) and were a perfect fit. No issues in ordering and shipping of the product. If you own a 2009 odyssey or similar model year, you will most likely have to replace your sway bar links if you change your front struts. Honda's OEM sway bar links will have to be damaged upon removal of the front struts due to the poor design of the bolt connecting the struts (Allen insert). The 1Auto sway bar links have a superior design because it replaced the 5mm Allen insert with a 18mm bolt to tight the assembly. Overall, very happy customer and the price was just right!
March 21, 2018
Purchased
5 months ago
good product and received it when I was told I would. I will be ordering more and will recommend the company to others.
July 24, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2017 Honda Odyssey Front Sway Bar Link Pair

This part replaces:

  • OE # 51320SHJA02
  • Beck Arnley 101-6913
  • Moog K750304
Part #: 1ASFK02459


Order must be placed by 4pm ET

How-to Video:

(05:14 min)