Replaces
2005-11 Toyota Tacoma Fender Flare Kit - 1ABFK00047
1ABFK00047Specifications:
- 6 Piece Kit
- Fits LH (Driver Side) & RH (Passenger Side) Front & Rear
- Size:
- Height - 6"
- Extension Width - 2-1/4"
- High quality ABS Plastic
- Stainless Hex head bolts, washers, and lock nuts
- Smooth black paint to match finish
- UV protected from fading and chalking
- Direct fit, no drilling or cutting required
- Includes hardware and instructions
Paint To Match Note:
"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion.
This part can also be installed without painting if desired.
Quick, Easy, No-Drill InstallationNo permanent modifications required. Flares mount using included wheel arch clips and heavy duty 3M double-sided tape.
Direct FitDesigned and contoured to fit your specific vehicle.
Durable ABS PlasticRugged, impact- and UV-resistant ABS plastic won't crack or warp
Lifetime Warranty
This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
The supplied screws were too short to fit through the fender Flares & Fender sheet metal. I had to go to Lowes to pick up 42 screws That were long enough to get the job done.
Secondly...
There were not enough washers to match the screws. Had to pick up those at Lowes as well.
Thirdly... there was not enough nuts to match the screws. You guessed it, Lowes.
And last...
the rear fender Flares did not line up to the factory holes in the fender of my 2006 Tacoma Short Bed. Two of the holes matched on each side of the rears. I had to drill out the remaining holes to make them work.
Once I over came the shortcomings of the delivered product and got them installed I am happy with how they turned out.
Although I had to spend extra time and money to make it all work. It would have been nice to have everything ready right out of the box. Hopefully 1A will look into these issues and fix the problems.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Reply
- Inaccurate
- Joshua C on Oct 25, 2016
- Purchased on Aug 15, 2016
Vehicle Fit
- 2005-2011 Toyota Tacoma Pocket Stainless Rivet Style Black Smooth - Paint to Match Fender Flare Kit 6 Piece Set for Models with 5 Foot Bed