Specifications:

  • Brand New Sway Bar End Links
  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:24)
    • Pry off the hub cap with a pry bar
    • Loosen the lug nuts with the vehicle on the ground
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull the wheel off the hub
  2. step : Removing the Sway Bar Link (1:15)
    • Spray rust penetrant on the upper sway bar link nut
    • Clean the upper sway bar link nut with a wire brush
    • Hold the upper sway bar link nut with a 6mm hex socket and breaker bar
    • Loosen the nut with a 17mm wrench
    • If the nut is stuck, hold the sway bar link ball joint with locking pliers if necessary
    • Remove the 17mm nut
    • If the nut remains stuck, cut the sway bar link stud with a hack saw or reciprocating saw
    • Hold the lower sway bar link ball joint with locking pliers
    • Remove the 17mm bolt from the lower sway bar link stud
    • Remove the sway bar link from the vehicle
  3. step : Installing the Sway Bar Link (7:54)
    • Hang the sway bar link where it attaches to the strut
    • Slide the sway bar link stud into sway bar
    • Start the 18mm nuts onto the sway bar link studs by hand
    • Hold the sway bar link ball joints with an 18mm wrench
    • Tighten the nuts with an 18mm socket and ratchet
    • Torque the 18mm nuts to 55 foot-pounds
  4. step : Installing the Wheel (8:52)
    • Slide the wheel onto the hub
    • Start the lug nuts by hand, with the tapered side facing the wheel
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts to 76 foot-pounds in a star pattern
    • Line up the hub cap with the valve stem
    • Push the hub cap onto the wheel

Tools needed for replacement:

    Allen Wrenches

  • 6mm Allen Wrench

  • General Tools

  • Jack Stands
  • Sawzall
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 17mm Socket
  • 18mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 17mm Wrench
  • 18mm Wrench
  • 21mm wrench

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Sway bar link
Great parts. Fit great. Easy installation. Would recommend to a friend. Quick shipping also.
April 22, 2017
Purchased
1 year ago
Good product.
I would recommend these to the do it yourselfers out there that enjoy working on their own card. Easy installation and bolts right on. Great product, even better price. The quality of 1aauto repair parts are reliable and Customer service is outstanding.
June 27, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
Do you know if I would need these if mine on the car now can be twisted side to side with just the roll of my fingers by pinching them on the bar? As well are installation instructions included with this purchase? I'm pretty sure my 08 scion tc needs these from the harsh comfort and clunking noise when I drive over bumps but I want to be 100% sure before the purchase. Any information will be greatly appreciated. Thank you
Jeremy T on Apr 20, 2017
BEST ANSWER: If your vehicle has that much play, it is recommended to replace the parts. The ball joint type end, or pivoting part should be semi tough or tight for a fully functional system.
Is this set for both sides front and rear?
Jeremy T on Apr 20, 2017
BEST ANSWER: Yes, you will receive the driver side and passenger side front, along with the driver side and passenger side rear sway bar links.

Vehicle Fit

  • 2005-2010 Scion tC Front & Rear Sway Bar Link 4 Piece Set

This part replaces:

  • Moog K750009
  • Moog K750008
  • Moog K80230
  • OE # 4882002030
  • OE # 4884021010
  • OE # 4883021020
  • OE # 88970146, 88971297, 4882002030
Part #: 1ASFK04927

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(10:10 min)