Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   without Motor
  • Operation:   Power

This replacement window regulator is just what you need to get your vehicle in good shape again!

Specifications:

  • RH (Passenger Side) FRONT
  • Does not include motor. Buyer will need to reuse original motor
  • Replaces dealer part numbers: 15861473, 25931990
  • Direct replacement
  • Built to strict quality control standards
  • Fits 4 Door Sedan models only

This window regulator makes a great replacement and has good cost savings over a dealer unit.

 

Please Note:

This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:41)
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Remove the T30 Torx screw inside the door handle
    • Pull out the door handle
    • Disconnect the latch cables from the door handle
    • Disconnect the lock wiring harness with a flat blade screwdriver
    • Push in the center of the rivet on the side of the door panel and pry out the side of the rivet with a flat blade screwdriver
    • Pry off the trim piece inside the door pull with a flat blade screwdriver
    • Remove the two T30 Torx screws inside the door pull
    • Pry up the window switch panel by hand
    • Disconnect the wiring harnesses
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Carefully peel off the water shield
  2. step : Removing the Window Regulator (3:30)
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Peel back the adhesive squares near the top of the door
    • Disconnect the window motor lead
    • Remove the five 10mm bolts from the regulator
    • Pull the window regulator out through the door
  3. step : Installing the New Regulator (5:38)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Insert and tighten the five 10mm bolts into the regulator
  4. step : Testing the Regulator (6:37)
    • Connect the window motor lead
    • Connect the window switch wiring harness
    • Turn the vehicle on
    • Run the motor up for 4 seconds
    • Disconnect the window motor lead
  5. step : Installing the New Regulator (6:44)
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
    • Replace the adhesive squares
  6. step : Reinstalling the Door Panel (7:34)
    • Put the water shield into place
    • Lift the door panel into place
    • Push in the door panel clips
    • Connect the wiring harnesses to the switch panel
    • Push the switch panel into place
    • Tighten the two T30 Torx screws inside the door pull
    • Push in the trim piece inside the door pull
    • Push in the rivet on the edge of the door panel
    • Connect the door lock wiring harness to the door handle
    • Connect the latch cables to the door handle
    • Push in the door handle
    • Tighten the T30 Torx screw inside the door handle
    • Push in the trim piece inside the door handle

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2005-2010Pontiac G6 Pontiac G6 4 Door Sedan Front Power Window Regulator without Motor Passenger Side
Part #: 1AWRG02191


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:30 min)