Replaces

2005-10 Pontiac G6 4 Door Rear Driver Side Power Power Window Motor & Regulator Assembly TRQ WRA52268

05-10 Pontiac G6 Rear Door Wdw Reg w/Motor LR

$ 54.95

$75.95

28% OFF

$75.95

28% OFF

FREE SAME DAY SHIPPING

Read 3 REVIEWS

WRA52268

In Stock

This part doesn’t fit a . Select from parts that fit.

Show parts that fit

Orders must be placed by 2pm ET

1A Auto Lifetime Warranty

Frequently bought together

2005-10 Pontiac G6 4 Door Rear Driver Side Power Power Window Motor & Regulator Assembly TRQ WRA52268

$54.95

05-10 Pontiac G6 Rear Door Wdw Reg w/Motor RR

2005-10 Pontiac G6 4 Door Rear Passenger Side Power Power Window Motor & Regulator Assembly TRQ WRA52269

$54.95

Description

Vehicle Fit

Warranty & Shipping

How-To & Tools

Part Details

Wiring Harness Included: Yes
Wire Quantity: 2
Installation Instructions Included: No
Gear Tooth Quantity: 8
Wiring Harness Length: 7.87 in
Mounting Hardware Included: No
Frame Material: Galvanized Steel
Operation: Power
Anti-Pinch Motor: No
Gear Material: Nylon

Item Condition: New

Attention California Customers:

proposition 65 icon WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

How to Replace Window Regulator 2005-2010 Pontiac G6

Created on:

Tools used

T30 Bit

10mm Socket

Ratchet

Trim Tool Set

Pick

Product Reviews

Loading reviews

5.00/ 5.0

It was a perfect fit.

It was a little tough removing. But, the reward was outstanding. I still hate sheet metal products. Like the door inner skin. Sharp edges, normal skin cuts.The hardest part was removing the window from its base. I thank you for the replacement part and helpful hints on replacing this item. Ps. I love watching the window go up and down. That's what I paid for and you delivered Thank you for your help!

john

Fast and accurate parts at great price.

G6 Rear Driver Side Power Window Regulator

Brian

Seems like excellent quality. Exact fit. Lifetime replacement warranty is definitely a 'nice to have' feature.

Customer Q&A

How do you separate the rear window from the base? Is there a special tool needed?

April 2, 2020

Charles P

The bottom of the window has a hole with a plastic grommet. This allows the window to pop in smoothly but is a pain to get out. You basically have to manhandle it and pry open the clip that hooks into that grommet in the window. It can be done by hand but isn't always easy.

April 2, 2020

M P

After trying very hard to part the window from the plastic clip, I ended up using an oscillating saw to carefully cut one side off. The window slipped up and out. Afterwards pull the window as high as possible to allow the removal of the old mechanism and replace it. Slowly raise the new mechanism and it should just clip into the window.

April 2, 2020

Brian K

Hello, This usually requires removal of a retaining clip that is holding the tray to the regulator. They can be hard to remove, but the window glass will then be freed and the old regulator can be removed. Thanks!

April 2, 2020

Adam G

No. In the center of the bottom of the glass, there is a circular hole in the glass for a round plastic wedge; the wedge holds the glass onto the window motor lift. Be sure not to break or lose the wedge as you will need it to re-secure the window onto the new motor.

April 3, 2020

B K

There is a nylon bushing which goes through a hole in the window. It has a hexagon hole in it. Align it with slot in metal track, by moving window up or down, to remove bushing. If you are able to turn it with an allen wrench, it will be easier to tap out. After removing bushing, secure window up with tape and replace regulator. Depending on new regulator may need to save hardware. Good luck-hope this helps!

April 4, 2020

J O