Part Details

  • Bearing Type: Tapered Roller Bearing
  • Quantity: 10 Piece Set
  • Kit Includes:
    (2) Front Lower Ball Joints
    (1) Tie Rod Adjusting Sleeve
    (2) Front Outer Tie Rods
    (1) Front Inner Tie Rod
    (2) Front Hub Assemblies
    (2) Front Upper Ball Joints

 

What are Tapered Bearings and Why Use Them?

Tapered bearings are better than roller ball bearings at handling forces exerted on the bearing during cornering (known as axial load) in trucks and large cars. 

Roller ball bearings have spherical ball bearings between two straight rings (called races). Tapered bearings use tapered rollers shaped like flat-topped cones and two races angled from the outside to the inside of the bearing. The greater the angle, the more axial load the bearing can handle.

Your model came from the factory with tapered bearings. This type of bearing handles cornering forces better for trucks and large cars. Roller ball bearings work well for smaller cars, but replacing a tapered bearing with a roller ball bearing will result in increased wear and faster failure.

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2005-2010Ford F250 Super Duty Truck Ford F250 Super Duty Truck 4 Wheel Drive Steering & Suspension Kit 10 Piece Set
2005-2010Ford F350 Super Duty Truck Ford F350 Super Duty Truck 4 Wheel Drive with Single Rear Wheels (SRW) Steering & Suspension Kit 10 Piece Set

This part replaces:

  • Moog K8607T
  • Moog ES80754
  • Moog ES80755
  • Moog ES3420S
  • Moog DS300008
  • Hollander 538-01727
  • Moog K8388T, K80026
  • OE # BC3Z3A131A
  • OE # 7C3Z3A131B
  • OE # F81Z3281CC
  • OE # 7C3Z3280D
  • OE # BC3Z 3A131 C
  • OE # BC3Z 3A131 F
  • OE # AC3Z 1104 F
Part #: 1ASFK04826

Out of Stock