Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Light Option:   Halogen

Specifications:
  • RH (Passenger Side)
  • Replaces dealer part numbers: 4805862AD, 4805862AH, 4805862AI, 48058623AJ, 57010862AA
  • Includes lens and housing
  • Bulbs not included
  • Correct for 300C Models with Halogen Projection Style headlights
    • Does not fit 300 or SRT-8 Models that use either Non Projection Halogen or HID (High Intensity Discharge) or Xenon Headlights

This Chrysler 300c headlight is a great replacement and has good cost savings over a head light from the dealer.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Removing the Bumper (0:59)
    • Remove the three push pins from inside each wheel well with a trim tool
    • Remove the 10mm bolt from the corner of the bumper on each side
    • Remove the push pins from the belly pan with the trim tool
    • Remove the 10mm bolts from the belly pan
    • Remove the belly pan
    • Disconnect the side marker light wiring harnesses
    • Disconnect the fog light wiring harness
    • Remove the four push pins from the top of the bumper
    • Pull the bumper forward and off
  2. step : Removing the Headlight (3:35)
    • Remove the 8mm or 5/16 bolts from the headlight bracket
    • Pull the headlight out
    • Disconnect the headlight wiring harnesses
  3. step : Installing the New Headlight (7:30)
    • Reconnect the wiring harnesses to the headlight (gray to outer light, black to inner)
    • Line up the bolt holes on the headlight bracket to the bolt holes on the vehicle
    • Replace the 8mm bolts into the headlight bracket
  4. step : Installing the Bumper (8:41)
    • Line up the bumper
    • Start the four push pins into the top of the bumper
    • Connect the bumper tabs to the fender slots
    • Push in the push pins at the top of the bumper
    • Install the 10mm bolts at each corner of the bumper
    • Push the push pins into the wheel well
    • Connect the fog light wiring harnesses
    • Connect the side marker light wiring harnesses
    • Lift the belly pan into place
    • Install the 10mm bolts for the belly pan

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket
  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2005-2010Chrysler 300 Chrysler 300 C Halogen Headlight Passenger Side
Part #: 1ALHL01452


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(11:03 min)