Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Light Option:   Halogen

Specifications

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: 4805863AD, 4805863AH, 4805863AI, 4805863AJ, 57010863AA, 4805862AD, 4805862AH, 4805862AI, 48058623AJ, 57010862AA
  • Includes lens and housing
  • Bulbs not included
  • Correct for 300C Models with Halogen Projection Style headlights
    • Does NOT fit 300 or SRT-8 Models that use either Non Projection Halogen or HID (High Intensity Discharge) or Xenon Headlights


 

Bulb Note:

These lights do not include bulbs. Occasionally lighting manufacturers do leave test bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, Parking light, Fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Fit guaranteed
  • This pair of headlamps will install just as your originals do. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • 1A Auto has the most comprehensive warranty.
  • If this headlight set should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing discolored, scratched, dull or damaged headlights with a new pair from 1A Auto can increase your resale value by up to 10%.
Safety
  • A new pair of headlights can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new pair of headlights from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Bumper (0:59)
    • Remove the three push pins from inside each wheel well with a trim tool
    • Remove the 10mm bolt from the corner of the bumper on each side
    • Remove the push pins from the belly pan with the trim tool
    • Remove the 10mm bolts from the belly pan
    • Remove the belly pan
    • Disconnect the side marker light wiring harnesses
    • Disconnect the fog light wiring harness
    • Remove the four push pins from the top of the bumper
    • Pull the bumper forward and off
  2. step : Removing the Headlight (3:35)
    • Remove the 8mm or 5/16 bolts from the headlight bracket
    • Pull the headlight out
    • Disconnect the headlight wiring harnesses
  3. step : Installing the New Headlight (7:30)
    • Reconnect the wiring harnesses to the headlight (gray to outer light, black to inner)
    • Line up the bolt holes on the headlight bracket to the bolt holes on the vehicle
    • Replace the 8mm bolts into the headlight bracket
  4. step : Installing the Bumper (8:41)
    • Line up the bumper
    • Start the four push pins into the top of the bumper
    • Connect the bumper tabs to the fender slots
    • Push in the push pins at the top of the bumper
    • Install the 10mm bolts at each corner of the bumper
    • Push the push pins into the wheel well
    • Connect the fog light wiring harnesses
    • Connect the side marker light wiring harnesses
    • Lift the belly pan into place
    • Install the 10mm bolts for the belly pan

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket
  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Excellent Product
Rarely ever write reviews but these lights deserve much more than that. Was skeptical buying anything other than OEM lights because of the projectors but these lights are even better than stock. Anybody interested in these lights do not think twice they are amazing!!!!!!
February 4, 2016
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
What is the low beam bulb size?
Mikey L December 7, 2016
We do not have the bulb information on file, as we do not carry bulbs.
Derek C December 14, 2016
If they are factory bulbs then low will be 9006 and high will be 9005
Timothy W November 14, 2017
Hi, I firstly want to say great YouTube videos. They are so helpful. Now I need parts however my question is. Do you ship to Auckland, New Zealand and can I add other parts to save costs on shipping? Thank you
Xavier T June 12, 2018
It work with 300c 5.7 hemi 2005 ??
Khlode A October 16, 2018
This will fit as long as your have halogen lights.
Emma F October 16, 2018
Year Make Model Description
2005-2010Chrysler 300 Chrysler 300 Halogen Headlight Pair C
Part #: 1ALHP00612


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(11:03 min)