This replacement mirror is just what you need to get your vehicle in good working condition again!

Specifications:

  • Fits RH (Passenger Side)
  • Power
  • Heated
  • Folding - Manual Operation
  • Injection molded Paint To Match plastic housing
    • Can be painted by the buyer to any color desired or installed as is
  • Replaces dealer part numbers: 91031AG02, 91054AG00
  • Direct replacement
  • Built to strict quality control standards

This mirror makes a great replacement and has good cost savings over a dealer part.

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Part Details

  • Mirror Heating Type: Heated
  • Mirror Color / Finish: Smooth Black - Paint to Match
  • Mirror Operation: Power

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:27)
    • Pry out the trim door behind the door handle
    • Pry off the door pull
    • Remove the Phillips screw from the door pull
    • Remove the Phillips screw from the door handle
    • Pry out the door panel with a trim tool
    • Lift the door panel off
    • Disconnect the electrical connector
    • Disconnect the cables from the door handle
  2. step : Removing the Side View Mirror (3:37)
    • Disconnect the electrical connector
    • Pry off the rubber boot on the door panel behind the mirror
    • Remove the three 8mm bolts from the mirror
    • Remove the mirror
  3. step : Installing the Side View Mirror (5:52)
    • Apply the padding to the new mirror
    • Insert the mirror into place
    • Tighten the three 8mm bolts to the mirror
    • Press on the rubber boot to the door panel
    • Connect the electrical connector
  4. step : Installing the Door Panel (8:31)
    • Connect the cables to the door handle
    • Connect the electrical connector
    • Lift the door panel on
    • Tighten the Phillips screw to the door handle
    • Tighten the Phillips screw to the door pull
    • Press on the door pull trim
    • Press on the door handle trim

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2009 Subaru Legacy Power Heated Smooth Black - Paint to Match Mirror Passenger Side
  • 2005-2009 Subaru Outback Power Heated Smooth Black - Paint to Match Mirror Passenger Side

This part replaces:

  • OE # 91054AG00
  • OE # 91031AG02
  • Partslink SU1321107
  • Hollander 128-60142R
Part #: 1AMRE02299

How-to Video:

(11:29 min)