Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Brand New Headlights
  • Fits LH (Driver Side)
  • Bulbs not included
  • Direct replacements
  • Built to strict quality control standards
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Removing the Headlight (1:03)
    • Remove the center bar using a flat blade screwdriver to pry out the clips on the back
    • If one of the edge clips breaks replace it with one of the center clips
    • Remove the two 8mm bolts at the top
    • Remove the 10mm bolt down on the side of the light
    • Pull up on the tab on the back of the headlight
    • Grab the bottom edge of the headlight and pull out
    • Disconnect the wiring harnesses by pressing on the tabs
  2. step : Changing Headlight Bulbs (4:05)
    • Twist the ring off
    • Pull the bulb out
    • Push the bulb back into place and replace the ring
    • For the smaller bulbs twist them counterclockwise and pull out the bulb
    • Replace by twisting clockwise
  3. step : Replacing the Headlight (5:11)
    • Reconnect the wiring harnesses
    • Put the light down and in, making sure the wires go down below the metal support
    • Push the light back into place.
    • Put the two 8mm bolts back into place
    • Put the 10mm bolt back into place
    • Replace the center bar by snapping the clips back into place

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 10mm Socket

4.50/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
headlight replacement
the new light had one light connection that did not fit the turn signal bulb that came with the head light,i had to use the old turn signal bulb connection to complete the install.
March 21, 2018
A1
As always,very satisfied with purchase and the service is second to none.
May 12, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2005-2009Chevy Equinox Chevy Equinox Headlight Driver Side
Part #: 1ALHL01137


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:47 min)