Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Brand New Headlights
  • Fits LH (Driver Side)
  • Direct replacement
  • Built to strict quality control standards
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Remove front bumper cover (1:01)
    • Remove the screws securing the bumper cover.
    • Remove the fasteners.
    • Finally, release the clips and remove the bumper cover, starting at the sides.
  2. step : Remove headlight (4:23)
    • Remove the three 10mm bolts.
    • Unplug/remove the bulbs.
  3. step : Install headlight (4:54)
    • Put the bulbs back in and plug them in.
    • DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clip the wiring back to the headlight.
    • Tighten your three 10mm bolts back in to 5 or 10 ft lbs.
  4. step : Replace bumper cover (6:40)
    • Replace clips, bolts and screws.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

3.75/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
1
1
0
Perfect fit, works great
Great value in a replacement headlight for a 2008 Corolla. Took about an hour to complete the job. Did not need to remove entire front bumper cover, just took off the fasteners from the drivers side up to the top fastener next to the passenger side.
January 1, 2018
Headlight assembly
Based on the youtube video it gave me enough information that I called and ordered the parts needed. Excellent service and very knowledgeable people. Great service and got the correct part.
May 9, 2018
08 Corolla Drivers headlight replacement
Fit is fine. The lens is not the same as the OE Toyota and it does not cast light exactly the same even when I put identical light bulbs in both sides the older OE Toyota lens is noticeably brighter.
September 22, 2018
Quality
Disappointed as there is condensation in light and its only been a week.
September 28, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2005-2008Toyota Corolla Toyota Corolla CE Headlight Driver Side
2005-2008Toyota Corolla Toyota Corolla LE Headlight Driver Side
Part #: 1ALHL01247


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:39 min)