Replaces

2005-07 Nissan Murano Steering & Suspension Kit - 1ASFK04761

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as an 8 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Quantity: 8 Piece Set
  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Front Inner Tie Rods

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Removing the Wheel (0:58)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (1:35)
    • Turn the wheel by hand
    • Clean off the threads with rust penetrant and a wire brush if necessary
    • Hold the lower stabilizer link stud with a 14mm wrench
    • Remove the nut from the stabilizer link with a 15mm hex socket
    • If the nut strips out, hold it in place with locking pliers and sawzall it off
  3. step : Reinstalling the Stabilizer Link (3:41)
    • Push the stabilizer link into place
    • Start the nuts by hand
    • Tighten the nuts
    • Torque the nuts to 29 foot-pounds
  4. step : Reattaching the Wheel (4:19)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Sawzall

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2005-2007Nissan Murano Nissan Murano 8 Piece Set Steering & Suspension Kit

This part replaces:

  • Moog K500129
  • OE # 48520CB025, D8520CB025
  • OE # 54668CA000, 54668CK000
  • OE # 54618CA000, 54618CK000
  • OE # 48521CB025
  • Moog K80255
  • Moog K80256
  • Moog EV800047
  • Moog ES800046
Part #: 1ASFK04761


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:14 min)