Replaces

2005-07 Jeep Liberty Tail Light Passenger Side - 1ALTL01293

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Includes:   with Guard
  • Side Location:   Passenger Side

Specifications:

  • RH (Passenger Side)
  • Includes lens & Housing
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Has a Black Tail Lamp Guard
    • Will fit models without a guard

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the tail light assembly (0:38)
    • Remove the two T20 Torx bolts
    • Firmly pull the tail light assembly out.
    • If all you need are new bulbs, disconnect them and replace them and continue to step 2.
    • Disconnect the wiring harness lead and unclip the wiring from the back of the assembly.
    • Transfer the bulbs to the new assembly, or install new bulbs into the new assembly.
  2. Open the tailgate and use a socket extension and Torx bit to access the driver's side Torx bolts.

  3. step : Install the tail light assembly (1:35)
    • Connect the wiring harness if you disconnected it.
    • Line up the pins and clip the tail light into the vehicle.
    • Secure with your T20 Torx Drivers.

Tools needed for replacement:

    Torx Drivers & Sockets

  • T20 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2005-2007Jeep Liberty Jeep Liberty Tail Light Passenger Side with Guard
Only 2 left in stock
Part #: 1ALTL01293


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:01 min)