Replaces

2005-07 Jeep Liberty Tail Light Driver Side - 1ALTL01292

Specifications:

  • LH (Driver Side)
  • Includes lens & Housing
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Has a Black Tail Lamp Guard
    • Will fit models without a guard
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Remove the tail light assembly (0:38)
    • Remove the two T20 Torx bolts
    • Firmly pull the tail light assembly out.
    • If all you need are new bulbs, disconnect them and replace them and continue to step 2.
    • Disconnect the wiring harness lead and unclip the wiring from the back of the assembly.
    • Transfer the bulbs to the new assembly, or install new bulbs into the new assembly.
  2. Open the tailgate and use a socket extension and Torx bit to access the driver's side Torx bolts.

  3. step : Install the tail light assembly (1:35)
    • Connect the wiring harness if you disconnected it.
    • Line up the pins and clip the tail light into the vehicle.
    • Secure with your T20 Torx Drivers.

Tools needed for replacement:

    Torx Drivers & Sockets

  • T20 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2007 Jeep Liberty Tail Light Driver Side with Guard

This part replaces:

  • Partslink CH2800160
  • Hollander 166-02216BL
  • OE # 5KJ41RXFAB/AD
  • DEPO 333-1932L-US2CR
Only 2 left in stock
Part #: 1ALTL01292

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(03:01 min)