2005-07 Chrysler 300 Trunk Lid Latch Mopar 5056244AD - MPBTL00001


  • Brand New Mopar Trunk Lid Latch
  • Original equipment part
  • Built to strict quality control standards 

48 States Only:

Due to shipping restrictions, we can only ship this to a physical address within the Contiguous U.S. (lower 48 states).

OEM Part

Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Accessing the Latch (0:59)
    • Lower the back seat
    • Pull the safety release latch
  2. step : Removing the Latch (1:27)
    • Remove the four plastic fasteners from the latch cover
    • Remove the cover
    • Disconnect the wiring harness
    • Remove the 10mm bolts from the latch
  3. step : Installing the Latch (3:32)
    • Insert the bolt through the ground and round hole
    • Tighten the 10mm bolts to the latch
    • Connect the wiring harness
    • Replace the cover
    • Press in the four plastic fasteners

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Does this work also on a 300 "C" ?
Sherry M on May 27, 2018
BEST ANSWER: Yes this will fit any 2005-2007 Chrysler 300.

Vehicle Fit

  • 2005-2007 Chrysler 300 Trunk Lid Latch Mopar 5056244AD

This part replaces:

  • Mopar 5056244AD
  • OE # 5056244AD
Part #: MPBTL00001

Out of Stock

Brand #: 5056244AD

How-to Video:

(04:48 min)