This replacement Toyota Camry tail light is just what you need to get your Toyota in good looking form again!

This tail light features:

  • Left Hand (Driver side)
  • Replaces dealer Part Number: 81560-06220
  • Mounts on 1/4 panel
  • Assembly includes lens and housing
  • Department of Transportation (DOT) & Society of Automotive Engineers (SAE) approved
  • Direct replacement
  • Fits USA built LE and XLE models only
  • Built to strict quality control standards
  • Bulbs and wiring not included

This Toyota Camry tail light makes a great replacement and has good cost savings over a dealer unit.

 

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Remove the tail light (0:23)
    • Pop open the trunk.
    • Flip open the access panel to service your bulbs.
    • Remove the Phillips screw in your trunk accessory hook.
    • Peel back the upholstery.
    • Unbolt the three 10 mm nuts and disconnect the wiring harness.
    • Remove the tail light from the vehicle.
  2. step : Install the new tail light (2:19)
    • Thread the wiring through the rear of the car and mount the tail light.
    • Install the tail light by bolting down the three 10 mm bolts.
    • Connect the wiring harness and bulbs.
    • Replace the upholstery and secure with the Phillips screw and accessory hook.
    • Close the trunk.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Toyota 2005-2006 Tail light
The price was reasonable, the item packaged very securely, and delivered very promptly. I am very happy with the service.

Dave Whisler, Dallas
August 14, 2018
Purchased
3 weeks ago
Great price, great fit
Really happy with the product. Arrived promptly. Installed easily. Works great.
October 17, 2017
Purchased
10 months ago
Fit well and worked great
The product for well and worked properly. It came with the 3 light bulbs supplied, which was good too.
A note - make sure you check the VIN of your vehicle (Camry), because some were made in the USA and some made in Japan. Depending on where the vehicle was manufactured, it will be a different part number.
January 22, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2006 Toyota Camry LE (US Built Models) Tail Light Driver Side
  • 2005-2006 Toyota Camry XLE (US Built Models) Tail Light Driver Side

This part replaces:

  • Partslink TO2800155
  • Hollander 166-59915BL
  • OE # 8156006220
  • TYC 11-6066-00-1
  • DEPO 312-1958L-AF1
Part #: 1ALTL00552


Order must be placed by 4pm ET

How-to Video:

(04:36 min)