Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Light Option:   Black Bezel

Specifications:
  • Fits RH (Passenger Side)
  • Includes lens and housing
  • Bulbs not included
  • Correct for US Built (First VIN digit 1, 4, or 5) SE models that have black trim
    • Will fit US Built LE & XLE models but will not have chrome trim
This headlight is a great replacement and has substantial cost savings over a head light from the dealer.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : To replace the bulb (0:52)
    • Reach into the engine bay behind the headlight assembly and twist and pull to remove the bulb.
    • Unplug the bulb.
    • Plug in the new bulb and twist and push it back in.
  2. step : Remove the headlight assembly (1:50)
    • Remove three 10 mm bolts- two around the headlight assembly you are working on and the one by the opposite headlight assembly.
    • Use a flat blade screwdriver to remove the pushclip on the bumper cover in the center.
    • Remove the pushclips on the bumper cover on the wheel well.
    • Remove a fourth 10 mm bolt in the bottom outside corner of the headlight that you have exposed by partially freeing the bumper cover.
    • Unplug the bulbs.
  3. step : Install headlight assembly (4:43)
    • Plug the harness into the new headlight assembly
    • Clip the headlight into place.
    • Use your 10mm socket and ratchet and bolt the assembly back in.
    • DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clip the bumper cover back on and use your 10 mm socket and ratchet to bolt the bolt by the far headlight back into place.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2005-2006Toyota Camry Toyota Camry Black Bezel Headlight Passenger Side SE (US Built Models)
Part #: 1ALHL00830


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:54 min)