These replacement mirrors are just what you need to get your vehicle in good looking form again!

These mirrors feature the following specifications:

  • Includes Both LH (Driver's Side) & RH (Passenger's Side)
  • Power mirrors
  • Injection molded plastic housings
  • Comes with a separate caps that are (Paint to match)
    • Caps can be painted by buyer to any color desired
  • Direct replacements
  • Built to strict quality control standards

These mirrors are designed to replace the factory mirrors and will install just as the originals do. They make great replacements that have good cost savings over the dealer parts.

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed in specifications, the mirror may not function properly.

Part Details

  • Quantity: Pair
  • Mirror Color / Finish: Smooth Black - Paint to Match
  • Mirror Operation: Power

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Mirror (0:34)
    • Pry off the mirror base trim panel with a flat blade screwdriver
    • Disconnect the mirror wiring harness
    • Remove the three 10mm nuts from the mirror
    • Pull off the mirror
  2. step : Preparing the New Mirror (1:05)
    • Pry the cover off the new mirror
    • Have the cover painted to match your vehicle
    • Alternatively, pry the cover off the old mirror with a flat blade screwdriver
    • Snap the matching mirror cover onto the new mirror
  3. step : Installing the New Mirror (1:53)
    • Push the new mirror into place
    • Fasten the three 10mm nuts onto the mirror
    • Connect the mirror wiring harness
    • Push on the mirror base trim panel

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2006 Nissan Altima Power Smooth Black - Paint to Match Mirror Pair
Part #: 1AMRP00754

How-to Video:

(02:32 min)