Specifications:

  • Fits LH (Driver Side)
    • Quarter Panel Mounted
  • Assembly includes lens and housing
  • Department of Transportation (DOT) & Society of Automotive Engineers (SAE) approved
  • Direct replacement
  • Built to strict quality control standards
  • Bulbs and wiring not included
  • Fits Models WITHOUT In Bed Utility Compartment

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Tail Light (0:36)
    • Remove the 10mm bolts from the tail light bracket
  2. step : Servicing the Bulbs (0:49)
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  3. step : Removing the Tail Light Harness (1:15)
    • Disconnect the tail light wiring harness from the truck
    • Disconnect the tail light wiring harness
    • Remove the gasket
    • Pull the tail light and the wiring harness out
  4. step : Installing the New Tail Light (1:59)
    • If the new tail light has clips remove the old clips from the truck with pliers
    • Line up the bolt holes on the headlight bracket to the bolt holes on the vehicle
    • Replace the 10mm bolts into the tail light bracket
    • Reconnect the tail light wiring harness
    • Re-clip the wiring harness to the truck

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2015 Nissan Titan without Utility Bed Tail Light Driver Side

This part replaces:

  • Partslink NI2800161
  • Hollander 166-59643L
  • OE # 265557S227
  • TYC 11-6000-90
  • DEPO 315-1948L-AF
Part #: 1ALTL00542

How-to Video:

(03:14 min)